Is there a way to see if your wood is rotten?

Locked
BAZINGA_3201
Member
Member
Posts: 2
Joined: March 17th, 2013, 2:48 pm
Division: B
State: PA
Has thanked: 0
Been thanked: 0

Is there a way to see if your wood is rotten?

Post by BAZINGA_3201 »

During the regionals competition, the wood on my boomilever failed, so is there a way to detect if it's rotten without testing it?
jander14indoor
Member
Member
Posts: 1653
Joined: April 30th, 2007, 7:54 am
Has thanked: 0
Been thanked: 29 times

Re: Is there a way to see if your wood is rotten?

Post by jander14indoor »

Not really, no, unless its got obvious discoloration, fuzz growing etc.

But why wouldn't you test your wood before you build? How to do it non-destructively has been talked about on this list many times. And once you've built it, as long as you keep it someplace dry and out of the light (UV radiation isn't good for much of anything, but you don't need to be a fanatic about it) it is VERY unlikely to rot before a contest.

Jeff Anderson
Livonia, MI
isaysroar
Member
Member
Posts: 78
Joined: November 12th, 2012, 6:22 pm
Division: C
State: PA
Has thanked: 0
Been thanked: 0

Re: Is there a way to see if your wood is rotten?

Post by isaysroar »

What if it was 1 piece of wood was rotten on your Boomilever? And you tested the model before and it worked really well. Then you made a new one so that it could be brand new for the competition. Then you find out once you test it at the competition that the 1 piece of wood that you used was rotten from the start? :|
2013
Disease Detectives- 4th
Helicopters- 1st
Road Scholar- 5th
Write it Do it- 2nd
isaysroar
Member
Member
Posts: 78
Joined: November 12th, 2012, 6:22 pm
Division: C
State: PA
Has thanked: 0
Been thanked: 0

Re: Is there a way to see if your wood is rotten?

Post by isaysroar »

What if it was 1 piece of wood was rotten on your Boomilever? And you tested the model before and it worked really well. Then you made a new one so that it could be brand new for the competition. Then you find out once you test it at the competition that the 1 piece of wood that you used was rotten from the start? :|
2013
Disease Detectives- 4th
Helicopters- 1st
Road Scholar- 5th
Write it Do it- 2nd
jander14indoor
Member
Member
Posts: 1653
Joined: April 30th, 2007, 7:54 am
Has thanked: 0
Been thanked: 29 times

Re: Is there a way to see if your wood is rotten?

Post by jander14indoor »

Rotten wood will have mechanical properties far below un-rotted wood, so of course your boom won't hold as much load.

Jeff Anderson
Livonia, MI
Balsa Man
Coach
Coach
Posts: 1318
Joined: November 13th, 2008, 3:01 am
Division: C
State: CO
Has thanked: 0
Been thanked: 3 times

Re: Is there a way to see if your wood is rotten?

Post by Balsa Man »

OK, I can't resist.....rising to the bait.

The whole question of "rotten" wood is, with all due respect, silly.
First, the odds of getting "rotten" wood from any commercial outlet are.....remote.
Second, if somehow you were to have a piece of "rotten" wood, of course you're going to be able to see it.
Third, what is much more likely, but also easy to see if you just take the time to look is "obvious defects- major grain issues/differences, discolorations. If you can see....possible issues in a piece of wood, you obviously don't want to use it.

The reason "the wood failed" is because it wasn't strong enough. Without any more detail, who knows why - did wood of the same size 'work" before?; was the density the same as what had worked before?
As Jeff notes, there's been a lot of discussion on evaluating/checking/testing/selecting wood on this board. Also a lot on forces at work, sizes and densities that may work, or do work. Well worth reading.....
Len Joeris
Fort Collins, CO
User avatar
YuiLover
Member
Member
Posts: 2
Joined: April 3rd, 2013, 10:52 am
Division: C
State: NJ
Has thanked: 0
Been thanked: 0
Contact:

Re: Is there a way to see if your wood is rotten?

Post by YuiLover »

if it smells its probbly rotton
NJ states 2014:
1st b0o0m
2d gl1dr
2.5th 4n6 (we tyed)
Locked

Return to “Boomilever B/C”

Who is online

Users browsing this forum: No registered users and 2 guests