Experimental Design B/C

lchs
Member
Member
Posts: 19
Joined: March 1st, 2012, 4:36 pm
Division: C
State: TX
Contact:

Re: Experimental Design B/C

Postby lchs » April 27th, 2015, 9:20 am

I had my state competition last weekend and the experiment had an interesting twist so I thought I'd mention it here. The materials we were given included a dynamometer (measures grip force), three different types of gloves, a stopwatch (even though we can bring in one), an angle measuring device (a protractor with an arm), and some other things I don't remember.

The unique aspect was a bonus that required teams to incorporate a second independent variable in the write up. We had a few different ideas but there was no way we could incorporate two numerical independent variables. One of them had to be categorical. Also, the second IV made data, graphs, and statistics really long..... :? Nonetheless, it was quite the challenge and kudos to the state proctor for coming up with the bonus.

User avatar
henceagrin36
Member
Member
Posts: 36
Joined: May 8th, 2013, 10:54 pm
Division: Grad
State: TX
Contact:

Re: Experimental Design B/C

Postby henceagrin36 » April 27th, 2015, 9:49 am

lchs wrote:I had my state competition last weekend and the experiment had an interesting twist so I thought I'd mention it here. The materials we were given included a dynamometer (measures grip force), three different types of gloves, a stopwatch (even though we can bring in one), an angle measuring device (a protractor with an arm), and some other things I don't remember.

The unique aspect was a bonus that required teams to incorporate a second independent variable in the write up. We had a few different ideas but there was no way we could incorporate two numerical independent variables. One of them had to be categorical. Also, the second IV made data, graphs, and statistics really long..... :? Nonetheless, it was quite the challenge and kudos to the state proctor for coming up with the bonus.

And a tape measure! I thought that bonus was really neat as well, but 27+ trials took forever. My procedures were like, "Repeat this step, now repeat the step before, and now repeat the step before again." The real struggle was naming the gloves though lol. What did you all do for your experiment?
The University of Texas at Austin
Longhorn Science Olympiad Alumni Association
William P. Clements High School Alumni

2014 Science Olympiad National Tournament
Rocks & Minerals - 1st Place
GeoLogic Mapping - 1st Place
Entomology - 2nd Place


"I love bridge"
"Rock on"

jkang
Member
Member
Posts: 107
Joined: October 17th, 2014, 8:49 pm
Division: Grad
State: TX
Contact:

Re: Experimental Design B/C

Postby jkang » April 27th, 2015, 10:02 am

henceagrin36 wrote: What did you all do for your experiment?

Yes, I am very interested in how other teams approached this prompt :?
UT Austin '19
Liberal Arts and Science Academy '15

lchs
Member
Member
Posts: 19
Joined: March 1st, 2012, 4:36 pm
Division: C
State: TX
Contact:

Re: Experimental Design B/C

Postby lchs » April 27th, 2015, 3:16 pm

jkang wrote:
henceagrin36 wrote: What did you all do for your experiment?

Yes, I am very interested in how other teams approached this prompt :?


Well, we used time for our first IV and measured force on the dynamometer at different time intervals. We were about to stick with one variable but I suggested we just do the experiment with each one of the gloves to add a second IV. Although it was a categorical IV, we used the data with respect to time for all the numerical stuff so it wasn't too bad. :D Oh and for labeling the gloves, we said latex gloves, orange gloves, and black gloves. I don't know if they were described in depth more elsewhere, but those were the labels I used in my data/graphs/analysis. And I completely agree with how tedious the numbers were..... I've never done such an intense Experimental Design :lol:

So what did y'all end up doing?

User avatar
henceagrin36
Member
Member
Posts: 36
Joined: May 8th, 2013, 10:54 pm
Division: Grad
State: TX
Contact:

Re: Experimental Design B/C

Postby henceagrin36 » April 27th, 2015, 3:24 pm

Yeah that was pretty intense! Our first independent variable were the different types of gloves. We forgot the word latex for the first half of the event so we had to go back and change our label of "thin black rubber glove" to "black latex glove." :lol: The other ones became the black cotton work glove and the yellow/green rubber+cotton gardening glove. Our second IV was the distance the glove was stretched from the resting state (ok pulling a cotton glove 6 cm didn't really work in real life but we needed to move on).
I do the problem through qualitative observations, so 27 trials didn't bother me at all.
The University of Texas at Austin
Longhorn Science Olympiad Alumni Association
William P. Clements High School Alumni

2014 Science Olympiad National Tournament
Rocks & Minerals - 1st Place
GeoLogic Mapping - 1st Place
Entomology - 2nd Place


"I love bridge"
"Rock on"

jkang
Member
Member
Posts: 107
Joined: October 17th, 2014, 8:49 pm
Division: Grad
State: TX
Contact:

Re: Experimental Design B/C

Postby jkang » April 27th, 2015, 5:56 pm

lchs wrote:Well, we used time for our first IV and measured force on the dynamometer at different time intervals. We were about to stick with one variable but I suggested we just do the experiment with each one of the gloves to add a second IV. Although it was a categorical IV, we used the data with respect to time for all the numerical stuff so it wasn't too bad. :D Oh and for labeling the gloves, we said latex gloves, orange gloves, and black gloves. I don't know if they were described in depth more elsewhere, but those were the labels I used in my data/graphs/analysis. And I completely agree with how tedious the numbers were..... I've never done such an intense Experimental Design :lol:

So what did y'all end up doing?

Sounds pretty much like the exact same experiment we did. What the heck proctors
UT Austin '19
Liberal Arts and Science Academy '15

deoxyribonucleicacid
Member
Member
Posts: 9
Joined: February 26th, 2015, 10:35 am
Division: B
State: -
Contact:

Re: Experimental Design B/C

Postby deoxyribonucleicacid » April 28th, 2015, 4:24 pm

So what is the hardest topic you've ever seen in Experimental Design (more specifically Divison B but Divison C helps)? My team struggles with Experimental Design.

User avatar
Panda Weasley
Member
Member
Posts: 132
Joined: September 27th, 2014, 6:24 am
Division: C
State: -
Location: Ravenclaw Tower
Contact:

Re: Experimental Design B/C

Postby Panda Weasley » April 28th, 2015, 4:26 pm

Hardest topic I have had was sample accuracy with a plateful of beads. I've already ranted about it several times though, so I won't say anything else right now. ;)
DFTBA!
Events 2019: Forensics and Fossils
Proud member of Teh Ento Cult.
:ugeek:

User avatar
samlan16
Member
Member
Posts: 519
Joined: December 30th, 2013, 2:54 pm
Division: Grad
State: TN
Contact:

Re: Experimental Design B/C

Postby samlan16 » April 29th, 2015, 1:58 pm

deoxyribonucleicacid wrote:So what is the hardest topic you've ever seen in Experimental Design (more specifically Divison B but Divison C helps)? My team struggles with Experimental Design.

1. Division C actually helps- ExpD is the now pretty much the same event for both divisions except for significant figures.
2. Hmm... my coach once gave me a bottle of potassium iodide, a slice of bread, a cracker, and a plate for an experiment. The experiment was only difficult because it was hard to quantify.
Remember, we are proud of every team that participated and you are all winners.

deoxyribonucleicacid
Member
Member
Posts: 9
Joined: February 26th, 2015, 10:35 am
Division: B
State: -
Contact:

Re: Experimental Design B/C

Postby deoxyribonucleicacid » April 30th, 2015, 5:23 am

samlan16 wrote:
deoxyribonucleicacid wrote:So what is the hardest topic you've ever seen in Experimental Design (more specifically Divison B but Divison C helps)? My team struggles with Experimental Design.

1. Division C actually helps- ExpD is the now pretty much the same event for both divisions except for significant figures.
2. Hmm... my coach once gave me a bottle of potassium iodide, a slice of bread, a cracker, and a plate for an experiment. The experiment was only difficult because it was hard to quantify.


So how did you go about doing that experiment with the bread and potassium iodide?

User avatar
samlan16
Member
Member
Posts: 519
Joined: December 30th, 2013, 2:54 pm
Division: Grad
State: TN
Contact:

Re: Experimental Design B/C

Postby samlan16 » April 30th, 2015, 11:56 am

deoxyribonucleicacid wrote:
samlan16 wrote:
deoxyribonucleicacid wrote:So what is the hardest topic you've ever seen in Experimental Design (more specifically Divison B but Divison C helps)? My team struggles with Experimental Design.

1. Division C actually helps- ExpD is the now pretty much the same event for both divisions except for significant figures.
2. Hmm... my coach once gave me a bottle of potassium iodide, a slice of bread, a cracker, and a plate for an experiment. The experiment was only difficult because it was hard to quantify.


So how did you go about doing that experiment with the bread and potassium iodide?

We eventually varied the volume of KI to observe the volume of bread that changed color due to the KI. Rather than partying with calculus, we used a cross section of each chunk as a determinant.
Remember, we are proud of every team that participated and you are all winners.


Return to “2015 Lab Events”

Who is online

Users browsing this forum: No registered users and 2 guests