Western Long Island, NY

nimbal
Member
Member
Posts: 1
Joined: March 7th, 2005, 5:51 pm
Location: NY

Re: Western Long Island, NY

Postby nimbal » March 10th, 2009, 10:08 am

Well on the stand where the turbine is placed instead of placing it on top of the stand we had to place it on a piece of wood in the middle of the stand which totally messed up both of our turbines but it wasn't out fault.
but still.
Oh and if you don't get it i don't blame you it's hard to explain.
If your blade assembly was the correct size and could attach to a standard CD mount, then you should have had no problem. They were letting you adjust the height of your blade on the ring stand. That was the point of the block on the ring stand.
Estimated amount of glucose used by an adult human brain each day, expressed in M&Ms: 250

User avatar
smartkid222
Exalted Member
Exalted Member
Posts: 774
Joined: June 22nd, 2008, 8:12 am
Division: C
State: NY
Location: Western Long Island

Re: Western Long Island, NY

Postby smartkid222 » March 30th, 2009, 2:32 pm

Does anyone remember what color the ribbons were on the medals for 3rd and 4rth place. One is white and one is yellow but i don't know which was is which. Thanks.
Image 2008 NY BLG Champ
2010 NY Helicopter Champ

Glacierguy1
Member
Member
Posts: 162
Joined: March 16th, 2006, 5:08 am
Division: Grad
State: NY
Location: LI,NY

Re: Western Long Island, NY

Postby Glacierguy1 » March 31st, 2009, 3:44 pm

White should be third and yellow should be 4th, but I dont know what they actually were.
SAVE OUR GLACIERS.

User avatar
The Crab
Member
Member
Posts: 4
Joined: March 23rd, 2009, 9:25 am
Division: B

Re: Western Long Island, NY

Postby The Crab » April 1st, 2009, 9:41 am

The order should be
Blue "Gold"
Red "Silver"
White "Bronze"
Yellow "your guess is as good as mine as to what medal it is supposed to be". 4th and 5th place look like the "bronze"
Green

At least this is what is has been in the past.

User avatar
smartkid222
Exalted Member
Exalted Member
Posts: 774
Joined: June 22nd, 2008, 8:12 am
Division: C
State: NY
Location: Western Long Island

Re: Western Long Island, NY

Postby smartkid222 » April 1st, 2009, 12:35 pm

thank you
Image 2008 NY BLG Champ
2010 NY Helicopter Champ

User avatar
fmtiger124
Member
Member
Posts: 480
Joined: March 8th, 2009, 3:59 pm
Division: Grad
State: NY

Re: Western Long Island, NY

Postby fmtiger124 » April 2nd, 2009, 2:20 pm

Well on the stand where the turbine is placed instead of placing it on top of the stand we had to place it on a piece of wood in the middle of the stand which totally messed up both of our turbines but it wasn't out fault.
but still.
Oh and if you don't get it i don't blame you it's hard to explain.
If your blade assembly was the correct size and could attach to a standard CD mount, then you should have had no problem. They were letting you adjust the height of your blade on the ring stand. That was the point of the block on the ring stand.
I'm from mid-state but for Physical Science, we had a pice of Plexiglass attached to the stand with hole on top and on the side to attach the turbines. Also we were allowed to adjust it to whatever angle/position we wanted also so I agree I don't see how you could have had a problem a block of wood would work the samy way pretty much
Image


Return to “2009 Invitationals, Regionals, and States”

Who is online

Users browsing this forum: No registered users and 1 guest