Scrambler B

User avatar
fishman100
Exalted Member
Exalted Member
Posts: 478
Joined: January 28th, 2011, 1:26 pm
Division: Grad
State: VA

Re: Scrambler B

Postby fishman100 » January 31st, 2016, 10:46 pm

For the 2014 season my partner and I constructed a PVC car; it's easy to (dis)assemble and essentially guaranteed to go straight. It's substantially heavier than a balsa car but it can still hit a mid-2 second time (or lower, depending on the type of launcher) if built properly. And you won't have to worry about the material deforming, unless you step on it or something :P
Langley HS Science Olympiad '15

User avatar
dragonfruit35
Exalted Member
Exalted Member
Posts: 279
Joined: February 28th, 2015, 7:49 am
Division: C
State: VA
Location: TJHSST

Re: Scrambler B

Postby dragonfruit35 » February 1st, 2016, 5:41 am

Whoops, I wasn't very clear. I meant build the launcher out of wood 2x4s or pvc, not the ETV. :oops:
(VT/FFX/Reg/States/Nats)
MV 1/1/5/-/- Mission 3/4/4/-/- Herp 7/2/4/-/-
WiFi -/-/-/4/13  Indoor Bottle Rocket -/-/-/1/- Code -/-/-/-/1
(Duke/Reg/Cornell/States/Nats)
MV 2/3/7/3/10 Mission 3/7/- Sounds 4/2/- Code 3/1/1/1/5 Herp -/-/11/1/26
[/color]
Goooooooo Colonials!!!

Shanta
Member
Member
Posts: 20
Joined: October 11th, 2015, 1:49 pm

Re: Scrambler B

Postby Shanta » February 1st, 2016, 11:46 am

thx so much gais!!!
also dragon_fruit35
since ur in div b VA
and so am i
what school are u in

User avatar
InfiniCuber
Member
Member
Posts: 171
Joined: October 20th, 2012, 6:15 am
Division: C
State: IN

Re: Scrambler B

Postby InfiniCuber » February 2nd, 2016, 7:33 am

For the 2014 season my partner and I constructed a PVC car; it's easy to (dis)assemble and essentially guaranteed to go straight. It's substantially heavier than a balsa car but it can still hit a mid-2 second time (or lower, depending on the type of launcher) if built properly. And you won't have to worry about the material deforming, unless you step on it or something :P
Hmm, interesting! I built my mousetrap vehicle in the 8th grade out of PVC but it turned out being much too heavy. What kind did you use? and how is it guaranteed to go straight? Just curious:P
Scioly isn't a club, or an organization. It is a lifestyle.
~Munster High School Science Olympiad Captain 2016~

User avatar
windu34
Moderator
Moderator
Posts: 1339
Joined: April 19th, 2015, 6:37 pm
Division: Grad
State: FL
Location: Gainesville, Florida

Re: Scrambler B

Postby windu34 » February 2nd, 2016, 8:05 am

For the 2014 season my partner and I constructed a PVC car; it's easy to (dis)assemble and essentially guaranteed to go straight. It's substantially heavier than a balsa car but it can still hit a mid-2 second time (or lower, depending on the type of launcher) if built properly. And you won't have to worry about the material deforming, unless you step on it or something :P
Hmm, interesting! I built my mousetrap vehicle in the 8th grade out of PVC but it turned out being much too heavy. What kind did you use? and how is it guaranteed to go straight? Just curious:P
PVC parts will connect together at 90 degree angles that are machined to be perfect (i believe this is what he meant)
Boca Raton Community High School Alumni
Florida State Tournament Director 2020
National Physical Sciences Rules Committee Member
kevin@floridascienceolympiad.org || windu34's Userpage

Circuit Lab Event Supervisor for 2020: UT Austin (B/C), MIT (C), Solon (C), Princeton (C), Golden Gate (C), Nationals (C)

User avatar
InfiniCuber
Member
Member
Posts: 171
Joined: October 20th, 2012, 6:15 am
Division: C
State: IN

Re: Scrambler B

Postby InfiniCuber » February 2nd, 2016, 8:09 am

For the 2014 season my partner and I constructed a PVC car; it's easy to (dis)assemble and essentially guaranteed to go straight. It's substantially heavier than a balsa car but it can still hit a mid-2 second time (or lower, depending on the type of launcher) if built properly. And you won't have to worry about the material deforming, unless you step on it or something :P
Hmm, interesting! I built my mousetrap vehicle in the 8th grade out of PVC but it turned out being much too heavy. What kind did you use? and how is it guaranteed to go straight? Just curious:P
PVC parts will connect together at 90 degree angles that are machined to be perfect (i believe this is what he meant)
That makes sense. The way I did it as a naive little middle schooler haha was drilling my axle perpendicular to the pvc. I can see that it could in theory be very straight, but attaching wheels could still be a bit weird, unless I'm not thinking of a way to do this perfectly:P
Scioly isn't a club, or an organization. It is a lifestyle.
~Munster High School Science Olympiad Captain 2016~

User avatar
dragonfruit35
Exalted Member
Exalted Member
Posts: 279
Joined: February 28th, 2015, 7:49 am
Division: C
State: VA
Location: TJHSST

Re: Scrambler B

Postby dragonfruit35 » February 2nd, 2016, 1:25 pm

Yep, I think PVC would probably be way too heavy. I'm using square plastic pipe sorta like PVC but a lot lighter.

Oh and shanta that's cool, what region you in?
(VT/FFX/Reg/States/Nats)
MV 1/1/5/-/- Mission 3/4/4/-/- Herp 7/2/4/-/-
WiFi -/-/-/4/13  Indoor Bottle Rocket -/-/-/1/- Code -/-/-/-/1
(Duke/Reg/Cornell/States/Nats)
MV 2/3/7/3/10 Mission 3/7/- Sounds 4/2/- Code 3/1/1/1/5 Herp -/-/11/1/26
[/color]
Goooooooo Colonials!!!

User avatar
fishman100
Exalted Member
Exalted Member
Posts: 478
Joined: January 28th, 2011, 1:26 pm
Division: Grad
State: VA

Re: Scrambler B

Postby fishman100 » February 2nd, 2016, 7:05 pm

For the 2014 season my partner and I constructed a PVC car; it's easy to (dis)assemble and essentially guaranteed to go straight. It's substantially heavier than a balsa car but it can still hit a mid-2 second time (or lower, depending on the type of launcher) if built properly. And you won't have to worry about the material deforming, unless you step on it or something :P
Hmm, interesting! I built my mousetrap vehicle in the 8th grade out of PVC but it turned out being much too heavy. What kind did you use? and how is it guaranteed to go straight? Just curious:P
PVC parts will connect together at 90 degree angles that are machined to be perfect (i believe this is what he meant)
^Yup
It just so happens that standard skateboard bearings fit perfectly into Charlotte PVC (which is also smaller/lighter than traditional PVC), but the car's mass was still around 300-400g.
Langley HS Science Olympiad '15

seadog
Member
Member
Posts: 49
Joined: November 19th, 2013, 12:21 pm
Division: C
State: NJ

Timing

Postby seadog » February 2nd, 2016, 8:33 pm

It takes our vehicle about 4 seconds to get to 9m and 6 seconds to get to 12m. Is this ok? Right now, the vehicle is made of balsa wood. Should we try to improve the vehicle by building it of lightweight metal or some other material? Any suggestions is highly appreciated. Thanks!!!!
National Placements:
2015:
ELG-1

2016:
ELG-3
Bridge-3

2018
Heli-5
Mousetrap-5
Towers-6

User avatar
InfiniCuber
Member
Member
Posts: 171
Joined: October 20th, 2012, 6:15 am
Division: C
State: IN

Re: Timing

Postby InfiniCuber » February 2nd, 2016, 9:04 pm

It takes our vehicle about 4 seconds to get to 9m and 6 seconds to get to 12m. Is this ok? Right now, the vehicle is made of balsa wood. Should we try to improve the vehicle by building it of lightweight metal or some other material? Any suggestions is highly appreciated. Thanks!!!!
If you can get your car really accurate, it's not bad. If you really want to be competitive, you want to be under 3 seconds, even ever so slightly above is still competitive, but ideal is less than that. Maybe you want to look into making your launcher more efficient or look at spring launchers?
Scioly isn't a club, or an organization. It is a lifestyle.
~Munster High School Science Olympiad Captain 2016~


Return to “2016 Build Events”

Who is online

Users browsing this forum: No registered users and 1 guest