Hydrogeology C

Test your knowledge of various Science Olympiad events.
driedmango
Member
Member
Posts: 36
Joined: April 10th, 2016, 6:07 am
Division: C
State: OH
Has thanked: 0
Been thanked: 0

Re: Hydrogeology C

Post by driedmango »

This question showed up on the UPenn test:
Name the three parts of the classification system the EPA uses for the ground water of the United States.
WE DID IT
[b]Northview | Westlake | MIT | Centerville | Solon | Regionals | States | Nats!! [/b]
[i]Remote:[/i] - | 1 | 2 | 2 | 1 | 3 | 1 | 3 |
[i]Rocks:[/i] 7 | - | 3 | 1 | 2 | 1 | 4 | 8 |
[i]Thermo:[/i] 8 | 4 | 4 | - | 7 | 3 | 2 | 11 |
[i]Team:[/i] 1 | 1 | 2 | 3 | 1 | 1 | 1 | 2 |
User avatar
appleshake123
Member
Member
Posts: 71
Joined: January 31st, 2016, 4:53 pm
Division: Grad
State: PA
Has thanked: 0
Been thanked: 0

Re: Hydrogeology C

Post by appleshake123 »

driedmango wrote:This question showed up on the UPenn test:
Name the three parts of the classification system the EPA uses for the ground water of the United States.
Class I - [b]Special Ground water[/b]. They are very high valued resources being an important source of drinking water or for the ecosystem, but they are extremely vulnerable to contamination.
 Class II - [b] Current and potential sources of drinking water and water having other beneficial uses[/b]. Groundwater that is in use or potentially available that is not class I is classified as this.  
Class III - [b]Groundwater not a potential source of drinking water and of limited beneficial use[/b]. Groundwater that is contaminated beyond levels of allowed use for drinking  or other beneficial purpose.
Here's the next question. What is TDS and what relation does it have with EPA's groundwater classification.
Bayard Rustin Class of 2018
Rensselaer Polytechnic Institute Class of 2022
Shock Value
It's About Time
Geologic Mapping
Dynamic Planet
Fermi
Hydrogeology
User avatar
Magikarpmaster629
Exalted Member
Exalted Member
Posts: 578
Joined: October 7th, 2014, 3:03 pm
Division: Grad
State: MA
Has thanked: 0
Been thanked: 1 time

Re: Hydrogeology C

Post by Magikarpmaster629 »

appleshake123 wrote:
driedmango wrote:This question showed up on the UPenn test:
Name the three parts of the classification system the EPA uses for the ground water of the United States.
Class I - [b]Special Ground water[/b]. They are very high valued resources being an important source of drinking water or for the ecosystem, but they are extremely vulnerable to contamination.
 Class II - [b] Current and potential sources of drinking water and water having other beneficial uses[/b]. Groundwater that is in use or potentially available that is not class I is classified as this.  
Class III - [b]Groundwater not a potential source of drinking water and of limited beneficial use[/b]. Groundwater that is contaminated beyond levels of allowed use for drinking  or other beneficial purpose.
Here's the next question. What is TDS and what relation does it have with EPA's groundwater classification.
TDS is Total Dissolved Solids. It's a measure of how saturated the water is with solids, similar to hardness of water. The EPA puts limits on how high the TDS can be and still be safe for water usage.
Ladue Science Olympiad (2014ish-2017)

A wild goose flies over a pond, leaving behind a voice in the wind.
A man passes through this world, leaving behind a name.
User avatar
appleshake123
Member
Member
Posts: 71
Joined: January 31st, 2016, 4:53 pm
Division: Grad
State: PA
Has thanked: 0
Been thanked: 0

Re: Hydrogeology C

Post by appleshake123 »

Magikarpmaster629 wrote: TDS is Total Dissolved Solids. It's a measure of how saturated the water is with solids, similar to hardness of water. The EPA puts limits on how high the TDS can be and still be safe for water usage.
Correct.
for others, one of the ways to classify  a class III groundwater is  having TDS >10,000 mg/L
Bayard Rustin Class of 2018
Rensselaer Polytechnic Institute Class of 2022
Shock Value
It's About Time
Geologic Mapping
Dynamic Planet
Fermi
Hydrogeology
User avatar
Magikarpmaster629
Exalted Member
Exalted Member
Posts: 578
Joined: October 7th, 2014, 3:03 pm
Division: Grad
State: MA
Has thanked: 0
Been thanked: 1 time

Re: Hydrogeology C

Post by Magikarpmaster629 »

What is the piezometric surface of a confined aquifer? How does it differ from the water table?
Ladue Science Olympiad (2014ish-2017)

A wild goose flies over a pond, leaving behind a voice in the wind.
A man passes through this world, leaving behind a name.
User avatar
Magikarpmaster629
Exalted Member
Exalted Member
Posts: 578
Joined: October 7th, 2014, 3:03 pm
Division: Grad
State: MA
Has thanked: 0
Been thanked: 1 time

Re: Hydrogeology C

Post by Magikarpmaster629 »

(anyone still here?)
Ladue Science Olympiad (2014ish-2017)

A wild goose flies over a pond, leaving behind a voice in the wind.
A man passes through this world, leaving behind a name.
18alia
Member
Member
Posts: 4
Joined: January 8th, 2017, 3:29 pm
Has thanked: 0
Been thanked: 0

Re: Hydrogeology C

Post by 18alia »

Magikarpmaster629 wrote:(anyone still here?)
Now that I'm doing this event for state, I guess I'll start this back up: A piezometric surface, also known as a potentiometric surface, is the elevation to which water in a confined well will rise if a well pierces it. This is different from the water table, which is the natural elevation of groundwater without a well. Now, my question:
What is the difference between porosity and permeability?
User avatar
Magikarpmaster629
Exalted Member
Exalted Member
Posts: 578
Joined: October 7th, 2014, 3:03 pm
Division: Grad
State: MA
Has thanked: 0
Been thanked: 1 time

Re: Hydrogeology C

Post by Magikarpmaster629 »

18alia wrote:
Magikarpmaster629 wrote:(anyone still here?)
Now that I'm doing this event for state, I guess I'll start this back up: A piezometric surface, also known as a potentiometric surface, is the elevation to which water in a confined well will rise if a well pierces it. This is different from the water table, which is the natural elevation of groundwater without a well. Now, my question:
What is the difference between porosity and permeability?
(typically we wait for the question-asker to confirm if we are right before asking the question, but you're fine) Porosity is simply a measure of the percent volume of pore or void space in a rock or soil sample. Permeability is a measure of how easily fluids can pass through the rock or soil sample.
Ladue Science Olympiad (2014ish-2017)

A wild goose flies over a pond, leaving behind a voice in the wind.
A man passes through this world, leaving behind a name.
User avatar
appleshake123
Member
Member
Posts: 71
Joined: January 31st, 2016, 4:53 pm
Division: Grad
State: PA
Has thanked: 0
Been thanked: 0

Re: Hydrogeology C

Post by appleshake123 »

Magikarpmaster629 wrote: (typically we wait for the question-asker to confirm if we are right before asking the question, but you're fine)
I think asking the question directly after answering for a low-participation thread such as this is good. This thread takes forever for some people to comfirm and answer quesitons compared to threads like astronomy.
Bayard Rustin Class of 2018
Rensselaer Polytechnic Institute Class of 2022
Shock Value
It's About Time
Geologic Mapping
Dynamic Planet
Fermi
Hydrogeology
User avatar
Magikarpmaster629
Exalted Member
Exalted Member
Posts: 578
Joined: October 7th, 2014, 3:03 pm
Division: Grad
State: MA
Has thanked: 0
Been thanked: 1 time

Re: Hydrogeology C

Post by Magikarpmaster629 »

Alright, I guess since this died I'll take my turn:

List three assumptions made by the hydrogeology challenge, and explain how they fail to predicts groundwater movement in reality.
Ladue Science Olympiad (2014ish-2017)

A wild goose flies over a pond, leaving behind a voice in the wind.
A man passes through this world, leaving behind a name.
Locked

Return to “2017 Question Marathons”

Who is online

Users browsing this forum: No registered users and 4 guests