Brake system

User avatar
MadCow2357
Member
Member
Posts: 229
Joined: November 19th, 2017, 9:09 am
Division: B
State: RI
Location: Gallagher MS
Contact:

Re: Brake system

Postby MadCow2357 » March 31st, 2018, 11:42 am

It's not that the micro switch's lever is not long enough. You misunderstood my question, but that's okay. :D The issue is kind of hard to explain in words, but I guess I'll give it another shot.

My wingnut is on a 1/4 threaded axle, and the "wings" travel over two pieces of wood as the wheels spin forward. Ther wingnut hits the microswitch, but then the back of the wingnut hits the hex nut soon after. The momentum of the vehicle causes the now locked-into-place wingnut to turn forward, smashing into the piece of wood that it travels along when going forward. Then, the wingnut, which is still locked into place with hex nut rebounds, causing the other wing to smash into the piece of wood in the back. The wingnut stays in that position, when one wing is stuck in a small indent (formed by numerous braking tests), and the other wing is slightly above the lever that activates the microswitch.
https://docs.google.com/presentation/d/ ... sp=sharing
Maybe these pictures help explain my problem.
2017-2018 Events: Battery Buggy, Mystery Architecture, and Towers
2018-2019 Events: Battery Buggy, Boomilever, Thermodynamics, maybe ELG

"Son, if you really want something in this life, you have to work for it. Now quiet! They're about to announce the lottery numbers." - Homer Simpson

User avatar
cheese
Member
Member
Posts: 204
Joined: April 8th, 2017, 7:59 pm
Division: C
State: -
Location: Wherever the cheese is
Contact:

Re: Brake system

Postby cheese » March 31st, 2018, 2:00 pm

Ohhh I see what you mean now. I had a problem similar to that. I would either change out the wood with a harder material, or put a guide block on top of the wing nut so that when the wingnut smashes into the nut and the momentum throws it up, it will block it and keep it down.
2018 Nationals: 2nd Place Mystery Architecture || 6th Place Battery Buggy
Cheese's Userpage

User avatar
MadCow2357
Member
Member
Posts: 229
Joined: November 19th, 2017, 9:09 am
Division: B
State: RI
Location: Gallagher MS
Contact:

Re: Brake system

Postby MadCow2357 » March 31st, 2018, 5:55 pm

I already spent wayyyy too much time building the frame than I should have, and I would hate to make any more significant changes. Could I put a piece of sheet metal on the part where the wingnut is biting into the wood? This way, it would probably not have the same problem.
2017-2018 Events: Battery Buggy, Mystery Architecture, and Towers
2018-2019 Events: Battery Buggy, Boomilever, Thermodynamics, maybe ELG

"Son, if you really want something in this life, you have to work for it. Now quiet! They're about to announce the lottery numbers." - Homer Simpson

User avatar
cheese
Member
Member
Posts: 204
Joined: April 8th, 2017, 7:59 pm
Division: C
State: -
Location: Wherever the cheese is
Contact:

Re: Brake system

Postby cheese » March 31st, 2018, 6:58 pm

Yeah that would probabaly work
2018 Nationals: 2nd Place Mystery Architecture || 6th Place Battery Buggy
Cheese's Userpage

shrewdPanther46
Member
Member
Posts: 400
Joined: October 9th, 2017, 6:25 pm
Division: C
State: NJ
Contact:

Re: Brake system

Postby shrewdPanther46 » April 1st, 2018, 7:57 pm

Sorry for not replying sooner, was a bit busy.

Metal works well, thats what we are doing. Regardless, you havae to make sure its not going too fast when the mechanical stopper engages.

also, u can extend part of the wingnut as opposed to the switch itself. Either way works.
salty

User avatar
MadCow2357
Member
Member
Posts: 229
Joined: November 19th, 2017, 9:09 am
Division: B
State: RI
Location: Gallagher MS
Contact:

Re: Brake system

Postby MadCow2357 » April 3rd, 2018, 2:17 pm

I filled in the indent with some gorilla glue, and now the wingnut triggers the switch fine. Thanks for all your help, btw! :D
2017-2018 Events: Battery Buggy, Mystery Architecture, and Towers
2018-2019 Events: Battery Buggy, Boomilever, Thermodynamics, maybe ELG

"Son, if you really want something in this life, you have to work for it. Now quiet! They're about to announce the lottery numbers." - Homer Simpson

User avatar
MadCow2357
Member
Member
Posts: 229
Joined: November 19th, 2017, 9:09 am
Division: B
State: RI
Location: Gallagher MS
Contact:

Re: Brake system

Postby MadCow2357 » April 20th, 2018, 7:24 am

MadCow2357 wrote:I filled in the indent with some gorilla glue, and now the wingnut triggers the switch fine. Thanks for all your help, btw! :D

Actually Gorilla Glue didn't work, I had to use sheet metal over the wood.
2017-2018 Events: Battery Buggy, Mystery Architecture, and Towers
2018-2019 Events: Battery Buggy, Boomilever, Thermodynamics, maybe ELG

"Son, if you really want something in this life, you have to work for it. Now quiet! They're about to announce the lottery numbers." - Homer Simpson


Return to “Battery Buggy B”

Who is online

Users browsing this forum: No registered users and 1 guest