Why does a good insulator have to be thin and porous??
-
- Member
- Posts: 110
- Joined: January 18th, 2017, 6:57 pm
- Division: C
- Has thanked: 0
- Been thanked: 0
Why does a good insulator have to be thin and porous??
I always assumed a good insulator had to be thick b/c the more material there is the more "stuff" the hampers the heat flow (ya, stupid flow of logic). But I'm wrong, specifically why does a thin box filled with pockets of air contribute to heat insulation?
The biologist speculates, "What's the meaning of life?"
The physicist asks, "In the universe, does matter really matter?"
The chemist replies, "I shall find solutions to both questions."
The physicist asks, "In the universe, does matter really matter?"
The chemist replies, "I shall find solutions to both questions."
-
- Member
- Posts: 225
- Joined: February 12th, 2017, 8:06 am
- Division: B
- State: NY
- Has thanked: 0
- Been thanked: 0
Re: Why does a good insulator have to be thin and porous??
I think it has more do to with the material used.geniusjohn5 wrote:I always assumed a good insulator had to be thick b/c the more material there is the more "stuff" the hampers the heat flow (ya, stupid flow of logic). But I'm wrong, specifically why does a thin box filled with pockets of air contribute to heat insulation?
2019 events: Water Quality, Battery Buggy, Elastic Launch Glider, Density Lab, Circuit Lab, Thermodynamics
R.C Murphy Co-Captain
Dank Memes Area Homeschool Team member
R.C Murphy Co-Captain
Dank Memes Area Homeschool Team member
-
- Exalted Member
- Posts: 1597
- Joined: January 18th, 2015, 7:42 am
- Division: C
- State: PA
- Has thanked: 6 times
- Been thanked: 15 times
Re: Why does a good insulator have to be thin and porous??
Air is a poor conductor. It has a thermal conductivity of around 0.025 W/(m*K). For comparison, wood has a thermal conductivity of around 0.1 W/(m*K). This is why materials like foam are good insulators, because they contain many pockets of trapped air. Transfer of heat through air usually takes place through convenction instead of conduction. Think about going outside on a chilly day. If there is wind outside, you feel much colder, but if there's no wind, you don't feel so cold. The air in the foam is secured so that heat cannot convect through the material. This helps prevent the heat from flowing from the inside to the outside of the box.MattChina wrote:I think it has more do to with the material used.geniusjohn5 wrote:I always assumed a good insulator had to be thick b/c the more material there is the more "stuff" the hampers the heat flow (ya, stupid flow of logic). But I'm wrong, specifically why does a thin box filled with pockets of air contribute to heat insulation?
-
- Member
- Posts: 32
- Joined: January 7th, 2019, 2:25 pm
- Division: B
- State: NJ
- Has thanked: 0
- Been thanked: 0
Re: Why does a good insulator have to be thin and porous??
If you look at the formula for conductivity, you'll see that the material used is very important. The conductivity of materials can range very widely, so although thickness and surface area are factors, the material used is probably to most important part.
Community 2018-2019
2018-2019 Events:
LISO/Rustin/Regs/Garnet/Cornell/States/Nats!
Thermo: 1/1/x/x/2/5/12
Circuit: 2/3/x/4/10/1/11
Experimental Design: 2/1/1/10/5/1/13
2018-2019 Medal Count: 15
National "What Are You Trying To Tell Me" Champion! (lol)
2018-2019 Events:
LISO/Rustin/Regs/Garnet/Cornell/States/Nats!
Thermo: 1/1/x/x/2/5/12
Circuit: 2/3/x/4/10/1/11
Experimental Design: 2/1/1/10/5/1/13
2018-2019 Medal Count: 15
National "What Are You Trying To Tell Me" Champion! (lol)
Who is online
Users browsing this forum: No registered users and 1 guest