Density Lab B

Test your knowledge of various Science Olympiad events.
User avatar
NewSciolyer
Member
Member
Posts: 55
Joined: March 19th, 2019, 4:28 pm
Division: B
State: MD
Has thanked: 0
Been thanked: 0

Re: Density Lab B

Post by NewSciolyer » February 25th, 2020, 2:21 pm

waterboy wrote:
February 25th, 2020, 7:11 am
NewSciolyer wrote:
February 24th, 2020, 3:12 pm
Okay I'll post a few:

1) How is molality affected by temperature?

2) A sample of gas occupies a volume of 11.1 L at 1.23 atm and 0.0 degrees Celsius. What volume does the sample of gas occupy at 3.15 atm and 100.0 degrees Celsius?

3)All of the below are types of densities except:
a) Mass density
b) Number density
c) Area density
d Volume density
1) Molality is not affected by temperature
2) 5.92 L
3) d-Volume density
Correct! Your turn!

User avatar
waterboy
Member
Member
Posts: 50
Joined: March 8th, 2019, 12:47 pm
Division: B
State: IN
Location: TJMS
Has thanked: 2 times
Been thanked: 2 times

Re: Density Lab B

Post by waterboy » February 25th, 2020, 7:27 pm

1) A bronze alloy is made of two metals. Tin makes up about 12% of the alloy with a density of 7.365g/cm^3 and the copper makes up the rest with a density of 8.96g/cm^3. What is the density of bronze using these numbers?

2) A 4-gram sugar cube (sucrose: C12H22O11) is dissolved in a 350-milliliter cup of hot water. Find the molarity of the sugar solution.

3) 6200 mL of an ideal gas is contained at 3.0 atm and 37 °C. How many moles of this gas are present?
Circuit Lab, Density Lab, Machines, Mission Possible :geek: :geek:

Remembering Gerard Putz

azboy1910
Member
Member
Posts: 26
Joined: November 3rd, 2018, 2:19 pm
Division: B
State: NC
Has thanked: 6 times
Been thanked: 1 time

Re: Density Lab B

Post by azboy1910 » February 25th, 2020, 8:05 pm

waterboy wrote:
February 25th, 2020, 7:27 pm
1) A bronze alloy is made of two metals. Tin makes up about 12% of the alloy with a density of 7.365g/cm^3 and the copper makes up the rest with a density of 8.96g/cm^3. What is the density of bronze using these numbers?

2) A 4-gram sugar cube (sucrose: C12H22O11) is dissolved in a 350-milliliter cup of hot water. Find the molarity of the sugar solution.

3) 6200 mL of an ideal gas is contained at 3.0 atm and 37 °C. How many moles of this gas are present?
1) 8.77 g/cm^3 (3 significant figures)
2) 0.0334 M (3 significant figures)
3) 0.73 moles (2 significant figures)
Jay M. Robinson Junior Varsity 2019-2020
2019 Events: Circuit Lab, Crime Busters, Density Lab
2020 Events: Circuit Lab, Codebusters (Trial), Crime Busters, Density Lab

User avatar
waterboy
Member
Member
Posts: 50
Joined: March 8th, 2019, 12:47 pm
Division: B
State: IN
Location: TJMS
Has thanked: 2 times
Been thanked: 2 times

Re: Density Lab B

Post by waterboy » February 26th, 2020, 4:35 am

Correct! Your turn.
Circuit Lab, Density Lab, Machines, Mission Possible :geek: :geek:

Remembering Gerard Putz

User avatar
Dwu1011
Member
Member
Posts: 16
Joined: October 14th, 2018, 3:57 pm
Division: B
State: NY
Has thanked: 0
Been thanked: 0

Re: Density Lab B

Post by Dwu1011 » March 2nd, 2020, 4:01 pm

Ok so I'll just go, since nobody else wants to go.
A rigid balloon of negligible mass has a volume of 0.32 m3 and has been evacuated. Argon gas is pumped into the balloon at a rate of 0.05 m3/s. The density of Argon gas is 1.784 g/L and the density of air is 1.23 g/L. How long until the balloon begins to sink?
Optics,Towers, Wright Stuff
Herpetology, Game On, Density Lab
2019-2020 Events:
Ornithology- 2/2/1/1
Density Lab - 1/2/1/4
ELG - 2/7/1/1
Machines- 4/1/1/0
Mission Possible - 13/15/1/1
Game On - 0/2/2/0
SQB - 0/0/0/0/1
Dwu1011's Userpage

User avatar
waterboy
Member
Member
Posts: 50
Joined: March 8th, 2019, 12:47 pm
Division: B
State: IN
Location: TJMS
Has thanked: 2 times
Been thanked: 2 times

Re: Density Lab B

Post by waterboy » March 2nd, 2020, 6:23 pm

Dwu1011 wrote:
March 2nd, 2020, 4:01 pm
Ok so I'll just go, since nobody else wants to go.
A rigid balloon of negligible mass has a volume of 0.32 m3 and has been evacuated. Argon gas is pumped into the balloon at a rate of 0.05 m3/s. The density of Argon gas is 1.784 g/L and the density of air is 1.23 g/L. How long until the balloon begins to sink?
Not sure if this is correct
15 seconds
Circuit Lab, Density Lab, Machines, Mission Possible :geek: :geek:

Remembering Gerard Putz

Fallsbury
Member
Member
Posts: 46
Joined: May 18th, 2019, 8:30 am
Division: B
State: NJ
Location: Plainsboro
Has thanked: 3 times
Been thanked: 4 times

Re: Density Lab B

Post by Fallsbury » March 2nd, 2020, 6:28 pm

Is the balloon filled with nothing or with air in the beginning, bc if it were filled with air wouldn't it just sink immediately?
These users thanked the author Fallsbury for the post:
azboy1910 (May 8th, 2020, 2:19 pm)
Events: Density Lab, Machines, Circuit Lab, Garden State (at regs), Heredity, Picture this
Division B
Community Middle School Captain

Fallsbury
Member
Member
Posts: 46
Joined: May 18th, 2019, 8:30 am
Division: B
State: NJ
Location: Plainsboro
Has thanked: 3 times
Been thanked: 4 times

Re: Density Lab B

Post by Fallsbury » March 2nd, 2020, 6:41 pm

@waterboy i dont think that the answer is right bc 15 seconds would fill up 0.75 m3 of the balloon which has a rigid shape and volume of 0.32 m3. I got around 4.41 seconds. I dont know how to hide my answer but dont grill me cuz its probably wrong anyway
Events: Density Lab, Machines, Circuit Lab, Garden State (at regs), Heredity, Picture this
Division B
Community Middle School Captain

AstroKing
Member
Member
Posts: 19
Joined: November 29th, 2019, 5:48 pm
Division: B
State: NJ
Has thanked: 0
Been thanked: 0

Re: Density Lab B

Post by AstroKing » March 3rd, 2020, 9:57 am

Hi Fallsbury!!!!!

User avatar
Dwu1011
Member
Member
Posts: 16
Joined: October 14th, 2018, 3:57 pm
Division: B
State: NY
Has thanked: 0
Been thanked: 0

Re: Density Lab B

Post by Dwu1011 » March 3rd, 2020, 2:30 pm

Fallsbury wrote:
March 2nd, 2020, 6:41 pm
@waterboy i dont think that the answer is right bc 15 seconds would fill up 0.75 m3 of the balloon which has a rigid shape and volume of 0.32 m3. I got around 4.41 seconds. I dont know how to hide my answer but dont grill me cuz its probably wrong anyway
Yup! 4.41 seconds is correct! your turn.
Optics,Towers, Wright Stuff
Herpetology, Game On, Density Lab
2019-2020 Events:
Ornithology- 2/2/1/1
Density Lab - 1/2/1/4
ELG - 2/7/1/1
Machines- 4/1/1/0
Mission Possible - 13/15/1/1
Game On - 0/2/2/0
SQB - 0/0/0/0/1
Dwu1011's Userpage

Post Reply

Return to “Question Marathons”

Who is online

Users browsing this forum: No registered users and 2 guests