Action i: Gear ratio of at least 3:1

Post Reply
trdd
Member
Member
Posts: 64
Joined: September 13th, 2018, 7:24 am
Has thanked: 0
Been thanked: 0

Action i: Gear ratio of at least 3:1

Post by trdd » September 5th, 2019, 4:49 am

Action i:
Use at least a 3:1 ratio gear system to initiate the next action.

Use this post to comment on this task.

trdd
Member
Member
Posts: 64
Joined: September 13th, 2018, 7:24 am
Has thanked: 0
Been thanked: 0

Re: Action i: Gear ratio of at least 3:1

Post by trdd » October 21st, 2019, 8:10 am

Question for everyone here:

Let's say I have a gear with 10 teeth and a mating gear with 30 teeth.

To achieve a 3:1 ratio is the 10 teeth gear the driving gear or the driven gear?

User avatar
Umaroth
Member
Member
Posts: 238
Joined: February 10th, 2018, 8:51 pm
Division: C
State: CA
Pronouns: He/Him/His
Location: Pretend hugging SIlverBreeze because social distancing
Has thanked: 38 times
Been thanked: 83 times

Re: Action i: Gear ratio of at least 3:1

Post by Umaroth » October 21st, 2019, 8:26 am

trdd wrote:
October 21st, 2019, 8:10 am
Question for everyone here:

Let's say I have a gear with 10 teeth and a mating gear with 30 teeth.

To achieve a 3:1 ratio is the 10 teeth gear the driving gear or the driven gear?
Gear ratio is defined as output:input, so the gear with 10 teeth would be driving the gear with 30 teeth.
Troy SciOly 2019-now
The Ambassador

Proud Kraemer SciOly Padre 2018-now
Dank Memes Area Homeschool Juggernaut 2018-now
Kraemer SciOly Pretty-Much Head Coach 2019-now
2020 Tryouts: Circuit, Code, Detector, DP, GeoMaps, Machines
States Events: HANDS ON DISEASE DETECTIVES

Umaroth's Userpage

trdd
Member
Member
Posts: 64
Joined: September 13th, 2018, 7:24 am
Has thanked: 0
Been thanked: 0

Re: Action i: Gear ratio of at least 3:1

Post by trdd » October 21st, 2019, 10:32 am

Umaroth wrote:
October 21st, 2019, 8:26 am
trdd wrote:
October 21st, 2019, 8:10 am
Question for everyone here:

Let's say I have a gear with 10 teeth and a mating gear with 30 teeth.

To achieve a 3:1 ratio is the 10 teeth gear the driving gear or the driven gear?
Gear ratio is defined as output:input, so the gear with 10 teeth would be driving the gear with 30 teeth.
That's what I thought. I wanted everyone to know and be clear about it as there could be competitors using a 1:3 ratio instead by mistake.

User avatar
bearasauras
Member
Member
Posts: 388
Joined: March 4th, 2003, 8:33 pm
State: CA
Location: Los Angeles, California
Has thanked: 25 times
Been thanked: 24 times
Contact:

Re: Action i: Gear ratio of at least 3:1

Post by bearasauras » November 2nd, 2019, 7:50 pm

NSO posted the following relevant FAQ:

Question:
"a 3:1 rato gear system. . ." Does this mean output teeth/input teeth = 3, or the other way around? Thanks.

Response:
The rules don't specify the direction it must go.

Edlc1
Member
Member
Posts: 2
Joined: December 13th, 2019, 6:07 pm
Has thanked: 0
Been thanked: 0

Re: Action i: Gear ratio of at least 3:1

Post by Edlc1 » December 13th, 2019, 6:14 pm

I have a 3:1 ratio gear system initiating the screw/wing nut action, while the gears run so is the screw/wing nut. The ES at our last invitational said that they were parallel actions. The rules state that the 3:1 ratio gear system initiates the next action, but does not specify minimum rotations to complete the gear action. I posted a question on the FAQ at sonic.org, but no reply yet. Can anyone comment on this?. Thank you

User avatar
waterboy
Member
Member
Posts: 50
Joined: March 8th, 2019, 12:47 pm
Division: B
State: IN
Location: TJMS
Has thanked: 2 times
Been thanked: 2 times

Re: Action i: Gear ratio of at least 3:1

Post by waterboy » December 13th, 2019, 6:58 pm

Edlc1 wrote:
December 13th, 2019, 6:14 pm
I have a 3:1 ratio gear system initiating the screw/wing nut action, while the gears run so is the screw/wing nut. The ES at our last invitational said that they were parallel actions. The rules state that the 3:1 ratio gear system initiates the next action, but does not specify minimum rotations to complete the gear action. I posted a question on the FAQ at sonic.org, but no reply yet. Can anyone comment on this?. Thank you
I would say that as long as the gear system initiates the next action, (which it sounds like yours does) then it doesn't matter how much it should turn since there is no specification.
Circuit Lab, Density Lab, Machines, Mission Possible :geek: :geek:

Remembering Gerard Putz

scioly1
Member
Member
Posts: 2
Joined: December 4th, 2019, 7:58 am
Division: B
State: CO
Has thanked: 0
Been thanked: 0

Re: Action i: Gear ratio of at least 3:1

Post by scioly1 » January 7th, 2020, 11:59 am

Could the 3:1 gear ratio pull on a string which lift a golf ball up (action vii) or would i need to do something like push a weight which lifts the golf ball?

GPRSTEM
Member
Member
Posts: 14
Joined: September 5th, 2018, 6:33 pm
Has thanked: 0
Been thanked: 0

Re: Action i: Gear ratio of at least 3:1

Post by GPRSTEM » January 8th, 2020, 7:22 am

How can you claim a gear system is 3:1 if it doesn't do the rotations as expected?

User avatar
nateDC
Member
Member
Posts: 33
Joined: November 30th, 2018, 4:13 pm
Division: C
State: MD
Pronouns: He/Him/His
Location: Right where I am
Has thanked: 7 times
Been thanked: 4 times

Re: Action i: Gear ratio of at least 3:1

Post by nateDC » January 16th, 2020, 2:59 pm

GPRSTEM wrote:
January 8th, 2020, 7:22 am
How can you claim a gear system is 3:1 if it doesn't do the rotations as expected?
There is no minimum rotation given.
scioly1 wrote:
January 7th, 2020, 11:59 am
Could the 3:1 gear ratio pull on a string which lift a golf ball up (action vii) or would i need to do something like push a weight which lifts the golf ball?
The gear system must initiate the next action, if you word your ASL carefully, you should be able to make that work.
I can't think of anything else to put here, so I just wrote this...

Post Reply

Return to “Mission Possible B”

Who is online

Users browsing this forum: No registered users and 1 guest