Detector Building C [TRIAL]

User avatar
EastStroudsburg13
Administrator
Administrator
Posts: 3032
Joined: January 17th, 2009, 7:32 am
Division: Grad
State: MD
Location: At work trying to be a real adult
Contact:

Detector Building C [TRIAL]

Postby EastStroudsburg13 » April 8th, 2019, 9:08 am

Detector Building is a trial event for Division C at the national tournament for the 2019 season.
East Stroudsburg South Class of 2012, Alumnus of JT Lambert, Drexel University Class of 2017

Helpful Links
Wiki
Wiki Pages that Need Work
FAQ and SciOly FAQ Wiki
Chat (See IRC Wiki for more info)
BBCode Wiki


If you have any questions for me, always feel free to shoot me a PM.

YeagerTheCat
Member
Member
Posts: 22
Joined: January 29th, 2018, 8:33 am

Re: Detector Building C [TRIAL]

Postby YeagerTheCat » April 9th, 2019, 12:27 pm

Tough specs for this thing. +/-0.2C resolution? Will be interesting...

trdd
Member
Member
Posts: 62
Joined: September 13th, 2018, 7:24 am

Re: Detector Building C [TRIAL]

Postby trdd » April 10th, 2019, 10:12 am

Looks like this will be an official Division C event next year.

User avatar
dxu46
Exalted Member
Exalted Member
Posts: 798
Joined: April 11th, 2017, 6:55 pm
Division: C
State: MO

Re: Detector Building C [TRIAL]

Postby dxu46 » April 18th, 2019, 1:37 pm

What microcontroller board is the best one to buy? I'm talking about functionality, how difficult to use, etc.

YeagerTheCat
Member
Member
Posts: 22
Joined: January 29th, 2018, 8:33 am

Re: Detector Building C [TRIAL]

Postby YeagerTheCat » April 18th, 2019, 9:03 pm

No right answer to that, but a basic Arduino is a decent place to start.

User avatar
acidbeaker
Member
Member
Posts: 7
Joined: March 15th, 2018, 8:50 pm
Division: C
State: CA

Re: Detector Building C [TRIAL]

Postby acidbeaker » April 19th, 2019, 11:01 am

What microcontroller board is the best one to buy? I'm talking about functionality, how difficult to use, etc.
I would highly recommend the Arduino over others, mostly because the Arduino is beginner-friendly and has lots of resources. If you have experience with other microcontrollers, like Raspberry Pi, you could use that, but in my experience the Arduino is simple enough for this event.

Lorant
Member
Member
Posts: 24
Joined: February 18th, 2019, 2:18 pm
Division: C
State: FL

Re: Detector Building C [TRIAL]

Postby Lorant » April 21st, 2019, 5:26 pm

Is there anything better than a thermistor to use for the actual detector part?
I build. A lot.
Events: Boomi, Gravity Vehicle, Wright Stuff

YeagerTheCat
Member
Member
Posts: 22
Joined: January 29th, 2018, 8:33 am

Re: Detector Building C [TRIAL]

Postby YeagerTheCat » April 22nd, 2019, 8:51 am

That is also a question without end :-). There are of course other options to measure temperature with (RTD, thermocouple). There are other analog output sensors, but it becomes a little tough to work out if they then fit within the rules in terms of it being automatically adjusted/calibrated.

trdd
Member
Member
Posts: 62
Joined: September 13th, 2018, 7:24 am

Re: Detector Building C [TRIAL]

Postby trdd » May 6th, 2019, 7:23 am

Is there anything better than a thermistor to use for the actual detector part?
That will depend on the rules for next year. Instead of temperature, the rules may ask to detect weight; or distance using piezo-electric or strain gages or optical sensors. They may even ask to detect speed, or time, luminosity, magnetism, or pressure.... But if they do ask for temperature, then thermistors are the way to go. Since it will be the first time that it will be an official event, they will probably stick with temperatures for now.

killer225whale
Member
Member
Posts: 30
Joined: November 23rd, 2009, 9:28 pm

Re: Detector Building C [TRIAL]

Postby killer225whale » May 6th, 2019, 9:16 am

What microcontroller board is the best one to buy? I'm talking about functionality, how difficult to use, etc.
I would highly recommend the Arduino over others, mostly because the Arduino is beginner-friendly and has lots of resources. If you have experience with other microcontrollers, like Raspberry Pi, you could use that, but in my experience the Arduino is simple enough for this event.
Some nuanced things to keep in mind though are the resolution of the ADC (analog-to-digital converter) on whatever microcontroller you use compared to the range and resolution of whatever you're trying to measure, and also how your voltage changes with temperature.


Return to “2019 Build Events”

Who is online

Users browsing this forum: No registered users and 1 guest