Scioly.org

31: Don't pick up your Scrambler by its (wooden) spine.

The night before State.

(Luckily, I had a replacement.)

32. Don't use a metal knife to pry out batteries unless you want to see a ton of sparks

33: Be prepared to clean up your winter wonderland after cutting insulating foam board.
(the foam bits are everywhere, use a vacuum/ moving blanket)

34. Melting styrofoam releases some slightly toxic fumes... Use a well-vented area.

35. Don't put super glue on styrofoam, it starts smoking under the right conditions.

36. Don't poke holes in Styrofoam using a soldering iron while the windows are closed (someone else, not me)

37. Don't stab with an Exacto knife, hold it like a pencil, you'll stab, break the blade, flip your hand on it, and cut your tendons.
38. Metal gets hot when grinding it on a bench grinder. soak in water and short contact with the wheel
39. WEAR A RESPIRATOR WHEN GRINDING OR SANDING ANYTHING!!!!
40. Don't use an Exacto knife to un CA glue your fingers...
41. Don't let your non-techy CA glue their fingers together on purpose
42. don't spay spray accelerator on them

43. Don't drip accelerator on the surface you're working on... it doesn't come off easily. (Easily, as in it doesn't come off AT ALL.)

44.Be very careful when Nitric Acid and Glycerin are in close proximity!!!!! (Don't ask me how that almost happened but the room is still intact!)

45. Know where the Fire Extinguisher is