Junkyard Challenge B

User avatar
mtheleman
Member
Member
Posts: 14
Joined: August 24th, 2009, 9:04 am
Division: B
State: KS

Re: Junkyard Challenge B

Postby mtheleman » March 3rd, 2011, 12:22 pm

Is there anybody who is still working on the bridge/cantilever/tower? My regional is not for 2 more weeks. I placed 12th at invitationals because I did not have a "free standing" cup. this appartently does not just mean that the cup can't be taped down, it can't be leaning against anything either. otherwise, I would have placed second
You should be able to tape a cup down. Then have a second cup that you place inside the taped down cup.
Michael Phelps trains with Chuck Norris swimming behind him.

User avatar
Littleboy
Member
Member
Posts: 373
Joined: March 14th, 2010, 4:53 pm
Division: C
State: MI
Location: Between the Earth's Core and Mars.

Re: Junkyard Challenge B

Postby Littleboy » March 3rd, 2011, 1:14 pm

No it has to be freestanding it can't be taped or touching anything except for the bottom. See this clarification
"A FREE STANDING CUP..MUST BE USED TO HOLD THE BALL" OBVIOUSLY THE CUP CANNOT BE SECURED (WITH TAPE,ETC) BUT CAN THE TOP SURFACE OF THE STRUCTURE HAVE AN EDGE, WALL, OR OTHER SURFACE THAT COULD HELP KEEP THE CUP FROM FALLING OFF OR OVER?

No. The structure may not have an edge, wall, or other surface that could help keep the cup from falling off or tipping over. According to rule 4.b. the cup must be free-standing on the structure. Throughout the testing, if the cup leans against anything other than the flat surface of the structure, then it will be supported by what it is leaning against and not be free-standing.
Also how well are your structures everyone escpecially rkoopma2

mnstrviola
WikiMod Emeritus
WikiMod Emeritus
Posts: 433
Joined: February 15th, 2011, 5:45 pm
Division: Grad
State: CA
Location: IU Bloomington

Re: Junkyard Challenge B

Postby mnstrviola » March 4th, 2011, 3:23 pm

so, the bottom surface where our cup is is the only thing the cup and ball can be supported by. can the bottom surface be anything from the materials?

zapofdoom34
Member
Member
Posts: 13
Joined: November 30th, 2010, 2:26 pm
Division: C
State: CA
Location: Somewhere in California...

Re: Junkyard Challenge B

Postby zapofdoom34 » March 4th, 2011, 9:17 pm

so, the bottom surface where our cup is is the only thing the cup and ball can be supported by. can the bottom surface be anything from the materials?
The bottom surface, I think, can be anything except for the tape, because you can't tape it down. But it can probably be supported by the other cups, bowls, plates, etc.

mnstrviola
WikiMod Emeritus
WikiMod Emeritus
Posts: 433
Joined: February 15th, 2011, 5:45 pm
Division: Grad
State: CA
Location: IU Bloomington

Re: Junkyard Challenge B

Postby mnstrviola » March 5th, 2011, 6:55 pm

so, the bottom surface where our cup is is the only thing the cup and ball can be supported by. can the bottom surface be anything from the materials?
The bottom surface, I think, can be anything except for the tape, because you can't tape it down. But it can probably be supported by the other cups, bowls, plates, etc.

dang it. then again, i didn't expect it to be allowed. Thanks

A Person
Member
Member
Posts: 185
Joined: July 18th, 2010, 12:34 pm
Division: Grad
State: KY

Re: Junkyard Challenge B

Postby A Person » March 6th, 2011, 12:10 pm

I have a question that I need to be answered ASAP, are tape dispensers allowed? This is like packing tape dispensers, office dispensers, ect.
"Any sufficiently advanced technology is indistinguishable from magic." - Arthur C. Clarke

User avatar
Littleboy
Member
Member
Posts: 373
Joined: March 14th, 2010, 4:53 pm
Division: C
State: MI
Location: Between the Earth's Core and Mars.

Re: Junkyard Challenge B

Postby Littleboy » March 6th, 2011, 12:14 pm

I would say no. But you could submit a clarification.

A Person
Member
Member
Posts: 185
Joined: July 18th, 2010, 12:34 pm
Division: Grad
State: KY

Re: Junkyard Challenge B

Postby A Person » March 6th, 2011, 1:52 pm

thanks, I'll just use scissors and duct tape
"Any sufficiently advanced technology is indistinguishable from magic." - Arthur C. Clarke

User avatar
ichaelm
Member
Member
Posts: 440
Joined: October 23rd, 2008, 3:10 pm
Division: Grad
State: PA
Location: CWRU, Cleveland, OH
Contact:

Re: Junkyard Challenge B

Postby ichaelm » March 7th, 2011, 6:28 pm

Among others, a new clarification was posted today that interested me: http://soinc.org/node/708

User avatar
XJcwolfyX
Member
Member
Posts: 340
Joined: October 22nd, 2010, 7:57 am
Division: C

Re: Junkyard Challenge B

Postby XJcwolfyX » March 7th, 2011, 7:56 pm

What are your distances for the catapult and bouncer?
Medal Counter: 73


Return to “2011 Build Events”

Who is online

Users browsing this forum: No registered users and 1 guest