Glue

jander14indoor
Member
Member
Posts: 1581
Joined: April 30th, 2007, 7:54 am

Re: Glue

Post by jander14indoor » March 20th, 2011, 2:01 pm

I use CA or balsa cement for these things. Trick with CA is making VERY good joints and using very little. Come to think of it, that's the trick with balsa cement too.

If by wood glue you mean Titebond or Elmer's white or yellow woodworking glue, I personally have trouble using small enough amounts and don't have the patience for it to dry.

Jeff Anderson
Livonia, MI

User avatar
kjhsscioly
Exalted Member
Exalted Member
Posts: 517
Joined: January 16th, 2009, 11:55 am
Division: Grad
State: IL
Location: Chicago

Re: Glue

Post by kjhsscioly » March 20th, 2011, 3:10 pm

I use elmer's yellow woodworking glue, and i usually don't have any issues getting a small enough amount on it. I put a dab of glue on the piece, then wipe off the excess to leave a thin film. Because it is less dense, it adds very little appreciable weight gain and is much less fussy than superglue.

User avatar
lllazar
Member
Member
Posts: 839
Joined: November 19th, 2009, 7:20 pm
Division: C
State: IL
Location: Probably at my laptop, multitasking while on AJAX chat....

Re: Glue

Post by lllazar » March 20th, 2011, 6:12 pm

But it takes soooo long to dry :( But yes, super glue can be frustrating at times. Does anyone know if any local hardware stores sell ambroid cement? I'm tired of paying 10 dollars ship and i honestly don't think that stuff is worth it....
2011 Season Events~

Fossils (Regionals ~1st) (State ~6th)
Towers (Regionals ~1st) (State ~3rd)
Helicopter (Regionals -3rd gahhh) (State ~5th)
Wind Power (Regionals ~1st) (State ~3rd TIERED!)

Hooray for getting everything i wanted?

User avatar
kjhsscioly
Exalted Member
Exalted Member
Posts: 517
Joined: January 16th, 2009, 11:55 am
Division: Grad
State: IL
Location: Chicago

Re: Glue

Post by kjhsscioly » March 21st, 2011, 4:17 pm

Really? It has never taken that long for me, and I end up unpinning most of my rotors and pieces within 10 minutes of gluing it.

User avatar
lllazar
Member
Member
Posts: 839
Joined: November 19th, 2009, 7:20 pm
Division: C
State: IL
Location: Probably at my laptop, multitasking while on AJAX chat....

Re: Glue

Post by lllazar » March 21st, 2011, 5:00 pm

As you can tell i'm a very impatient person :)
2011 Season Events~

Fossils (Regionals ~1st) (State ~6th)
Towers (Regionals ~1st) (State ~3rd)
Helicopter (Regionals -3rd gahhh) (State ~5th)
Wind Power (Regionals ~1st) (State ~3rd TIERED!)

Hooray for getting everything i wanted?

User avatar
kjhsscioly
Exalted Member
Exalted Member
Posts: 517
Joined: January 16th, 2009, 11:55 am
Division: Grad
State: IL
Location: Chicago

Re: Glue

Post by kjhsscioly » March 21st, 2011, 5:10 pm

Yes, but it has taken superglue longer to dry than wood glue does... at least for me

User avatar
illusionist
Member
Member
Posts: 942
Joined: March 20th, 2010, 4:13 pm
Division: C
State: MI

Re: Glue

Post by illusionist » March 21st, 2011, 5:13 pm

I use just a touch of accelerator on some of my un-load bearing joints. It sets the super glue in under 2 seconds, almost as strong as it's ever going to get. Plus in competitions, if something breaks, you can put a drop of super glue and a drop of accelerator.
2012-2013 Building Event Captain
Rule 7d. "Event Supervisors are allowed to break any competitors' devices" -bearasauras

User avatar
kjhsscioly
Exalted Member
Exalted Member
Posts: 517
Joined: January 16th, 2009, 11:55 am
Division: Grad
State: IL
Location: Chicago

Re: Glue

Post by kjhsscioly » March 21st, 2011, 5:14 pm

Super glue is great for competition, but not really for building IMHO

jander14indoor
Member
Member
Posts: 1581
Joined: April 30th, 2007, 7:54 am

Re: Glue

Post by jander14indoor » March 22nd, 2011, 12:52 pm

ALL the glues can work, which is best, depends as much on what works for you. I'll refer again to a long article on how to use glues and make good joints on the NSO website, under the Helicopter Duration event, its the first resource listed.

Jeff Anderson
Livonia, MI

User avatar
chia
Member
Member
Posts: 558
Joined: January 13th, 2009, 5:09 pm
Division: Grad
State: IL
Location: Derse

Re: Glue

Post by chia » March 30th, 2011, 9:05 pm

Rotor before spray glue and mylar: .55 g
Rotor after: .61 g
ohhhh yeah.
(avatar is by xamag)
Favorite events: Anatomy, Microbe Mission, Ornithology, Circuit Lab, Helicopter
NCHS '13
==>

Locked

Return to “Helicopters C”

Who is online

Users browsing this forum: No registered users and 1 guest