Helicopter Testing

WCarneyJX
Member
Member
Posts: 22
Joined: February 2nd, 2011, 2:45 pm
Division: C
State: FL
Has thanked: 0
Been thanked: 0

Re: Helicopter Testing

Post by WCarneyJX »

I've uploaded a low res copy of the plan and will link to it after it's approved.
River City Science Academy - Florida 2010 Wright Stuff Champs
Coach for:
Storm the Castle
Helicopter

"My kid and my latinum go to Starfleet Academy"
WCarneyJX
Member
Member
Posts: 22
Joined: February 2nd, 2011, 2:45 pm
Division: C
State: FL
Has thanked: 0
Been thanked: 0

Re: Helicopter Testing

Post by WCarneyJX »

3293|68/SO_Helicopter_Plan_Low_Res.jpg

Not sure why the thumbnail doesn't show up but clicking the "X" icon above brings up he Helicopetr plan.
River City Science Academy - Florida 2010 Wright Stuff Champs
Coach for:
Storm the Castle
Helicopter

"My kid and my latinum go to Starfleet Academy"
User avatar
chia
Member
Member
Posts: 558
Joined: January 13th, 2009, 5:09 pm
Division: Grad
State: IL
Has thanked: 0
Been thanked: 0

Re: Helicopter Testing

Post by chia »

Baw... I just tried testing my new helicopter, which has both rotors free, and it started going every which way, crashed into a wall, and the top prop hook came off. Thankfully the rotors themselves stayed intact (rotors are so much sturdier than they look!). I'm just not sure why the top hook wasn't strong enough; I glued it the exact same way I've glued them before.
Also, do you find it sort of awkward to launch a helicopter with both rotors free? When one is fixed you just hold onto the motor stick with one hand and the top rotor with the other, but with this kind you need to keep both rotors from spinning...
(avatar is by xamag)
Favorite events: Anatomy, Microbe Mission, Ornithology, Circuit Lab, Helicopter
NCHS '13
==>
WCarneyJX
Member
Member
Posts: 22
Joined: February 2nd, 2011, 2:45 pm
Division: C
State: FL
Has thanked: 0
Been thanked: 0

Re: Helicopter Testing

Post by WCarneyJX »

Chia,

The big question is the flight pattern. Assuming the rotors are constructed correctly with one clockwise and one counter clockwise, the only other explanation I can think of is massive motor stick bending.

As for launching the Heli with both rotors free it just takes a bit of practice. My kids sort of hold both rotors and then release the top, transfer that hand to the middle of the motor stick, then allow the bottom rotor to spin up a bit and let her fly.

What sort of prop hooks are you using?
River City Science Academy - Florida 2010 Wright Stuff Champs
Coach for:
Storm the Castle
Helicopter

"My kid and my latinum go to Starfleet Academy"
User avatar
chia
Member
Member
Posts: 558
Joined: January 13th, 2009, 5:09 pm
Division: Grad
State: IL
Has thanked: 0
Been thanked: 0

Re: Helicopter Testing

Post by chia »

I don't think the motor stick was bending that much. I may have just released it at an angle. I think it could have straightened itself out if I had been testing it in an actual gym instead of my cramped foyer...
Using aluminum hooks btw
(avatar is by xamag)
Favorite events: Anatomy, Microbe Mission, Ornithology, Circuit Lab, Helicopter
NCHS '13
==>
WCarneyJX
Member
Member
Posts: 22
Joined: February 2nd, 2011, 2:45 pm
Division: C
State: FL
Has thanked: 0
Been thanked: 0

Re: Helicopter Testing

Post by WCarneyJX »

Do you mean aluminum tubing with wire hooks? If so, you can wrap the tubing with some thread and glue but you have to consider the weight of doing so. also consider it probably wouldn't have come loose except for the crash...
River City Science Academy - Florida 2010 Wright Stuff Champs
Coach for:
Storm the Castle
Helicopter

"My kid and my latinum go to Starfleet Academy"
User avatar
chia
Member
Member
Posts: 558
Joined: January 13th, 2009, 5:09 pm
Division: Grad
State: IL
Has thanked: 0
Been thanked: 0

Re: Helicopter Testing

Post by chia »

Nope, it's a bent aluminum metal hanger (not the best method, but what I have available at the moment). Either way, I reinforced it with thread, like you mentioned (it was underweight anyway).
(avatar is by xamag)
Favorite events: Anatomy, Microbe Mission, Ornithology, Circuit Lab, Helicopter
NCHS '13
==>
jander14indoor
Member
Member
Posts: 1653
Joined: April 30th, 2007, 7:54 am
Has thanked: 0
Been thanked: 29 times

Re: Helicopter Testing

Post by jander14indoor »

Where's the balance on this new copter? You want the center of gravity to be low to help stabilize it. To high and you'll get wandering like that.

Jeff Anderson
Livonia, MI
User avatar
kjhsscioly
Exalted Member
Exalted Member
Posts: 517
Joined: January 16th, 2009, 11:55 am
Division: Grad
State: IL
Has thanked: 0
Been thanked: 0

Re: Helicopter Testing

Post by kjhsscioly »

I don't have the copter with me, but it should be low, we added clay at the bottom
thewinner
Member
Member
Posts: 110
Joined: March 18th, 2011, 12:18 pm
Division: B
State: NJ
Has thanked: 0
Been thanked: 0

Re: Helicopter Testing

Post by thewinner »

And for stability, the top rotor needs to generate more lift than the lower. Try fiddling with the pitches of the rotors and see what works best.
I win.
Locked

Return to “Helicopters C”

Who is online

Users browsing this forum: No registered users and 1 guest