Mousetrap Vehicle B

PaulJ
Member
Member
Posts: 3
Joined: July 27th, 2011, 10:37 pm
Division: B
State: CA

Re: Mousetrap Vehicle B

Postby PaulJ » November 18th, 2011, 12:01 am

I just won 1st in mousetrap veacle:mrgreen:
Pics or it didn't happen! :D

User avatar
lenkagamine
Member
Member
Posts: 6
Joined: November 11th, 2011, 11:54 am
Division: B
State: CA

Re: Mousetrap Vehicle B

Postby lenkagamine » November 26th, 2011, 2:22 pm

Thanks! I missed that section. I still can't find a good mousetrap though... mine is weak and can't support the weight of the arm. Any suggestions?
Two options, first try to find some stronger mousetraps. Generic ones that come in kits and such are probably weaker than name brand ones you can purchase at hardware stores. Second, I imagine your arm is too heavy, you want it to be as light and stiff as possible. Also, the length of the arm can seriously affect the vehicle. You might want to shorten the arm. What are you using for a material and how long is it?
Thanks for the help! I was able to figure out the arm problem now... but now i have this other problem... My back axle's completely crooked!! *sigh* oh well, time to build another one, i guess.
★☻☮♥♫♪☯☺☆ Events: Reach 4 the Stars, Compute This, and Mission Possible

User avatar
illusionist
Member
Member
Posts: 942
Joined: March 20th, 2010, 4:13 pm
Division: C
State: MI

Re: Mousetrap Vehicle B

Postby illusionist » November 27th, 2011, 6:36 am

Build a whole new vehicle?! You should try to design your vehicle so that you can just swap out parts. But the best solution for a crooked axle is to simply replace it. There's no point in trying to make it work.

Saje_Willis
Member
Member
Posts: 2
Joined: October 17th, 2011, 1:39 pm
Division: B
State: KS

Re: Mousetrap Vehicle B

Postby Saje_Willis » November 29th, 2011, 7:02 am

Does any wone know how to set up the trigger and which way its suppose to land on the front of the chasis :ugeek:

Saje_Willis
Member
Member
Posts: 2
Joined: October 17th, 2011, 1:39 pm
Division: B
State: KS

Re: Mousetrap Vehicle B

Postby Saje_Willis » November 29th, 2011, 7:08 am

Where are u placing the paper clip at the front or the back of the chasis

User avatar
illusionist
Member
Member
Posts: 942
Joined: March 20th, 2010, 4:13 pm
Division: C
State: MI

Re: Mousetrap Vehicle B

Postby illusionist » November 29th, 2011, 12:15 pm

Where are u placing the paper clip at the front or the back of the chasis
I do not have the rules on me, but if the rules do not prohibit the placement of the paper clip, then it's up to you. But please read the rules first. There is no best place to put it. If your vehicle is consistently going past the point, then it would be better to maybe put the paperclip in the back.
2012-2013 Building Event Captain
Rule 7d. "Event Supervisors are allowed to break any competitors' devices" -bearasauras

User avatar
mousetrapfury
Member
Member
Posts: 10
Joined: November 29th, 2011, 12:48 pm
Division: B
State: NC

Re: Mousetrap Vehicle B

Postby mousetrapfury » November 29th, 2011, 1:24 pm

what is the best brand and type of mousetrap (HELP PLEASE!!!!!!!!!!!!!!!!!!!!!!!!!!!!)

please post link here for website it is sold on :?

User avatar
illusionist
Member
Member
Posts: 942
Joined: March 20th, 2010, 4:13 pm
Division: C
State: MI

Re: Mousetrap Vehicle B

Postby illusionist » November 29th, 2011, 1:47 pm

The two most popular brands are Tomcat and Victor. You can find both of those in many stores such as Walmart, Home Depot, Lowes, Meijer, etc.
2012-2013 Building Event Captain
Rule 7d. "Event Supervisors are allowed to break any competitors' devices" -bearasauras

User avatar
mousetrapfury
Member
Member
Posts: 10
Joined: November 29th, 2011, 12:48 pm
Division: B
State: NC

Re: Mousetrap Vehicle B

Postby mousetrapfury » December 3rd, 2011, 6:44 am

thanks
also do you know how to make a good sighting device because on battery buggy last year we only got 4th place because we had a terable sighting device so i am really worried this year :D

User avatar
illusionist
Member
Member
Posts: 942
Joined: March 20th, 2010, 4:13 pm
Division: C
State: MI

Re: Mousetrap Vehicle B

Postby illusionist » December 3rd, 2011, 4:06 pm

Well, what we did:
Attach two toothpicks on your vehicle, one at front, and one at back. Then we used string to mark center of the track width. Then, just align the toothpicks to the string (this is assuming that your vehicle travels perfectly straight).

If not, you can use the side scope-thingy from a telescope and simply attach that to your vehicle, then use a marker or something to mark the middle of the track width at the finish line. Then, just look through the sight and line your vehicle up with the marker.
2012-2013 Building Event Captain
Rule 7d. "Event Supervisors are allowed to break any competitors' devices" -bearasauras


Return to “2012 Build Events”

Who is online

Users browsing this forum: No registered users and 1 guest