Electric Vehicle C

robotman
Admin Emeritus
Admin Emeritus
Posts: 1447
Joined: June 29th, 2008, 7:37 pm
Division: Grad
State: TX
Location: 127.0.0.1
Contact:

Electric Vehicle C

Postby robotman » August 22nd, 2015, 2:39 pm

Discussion for Electric Vehicle C.

Resources:
2009 Thread
Electric Vehicle Image Gallery
Edit the [wiki][/wiki].
Upload to the Image Gallery
Get Medals

User avatar
windu34
Moderator
Moderator
Posts: 1339
Joined: April 19th, 2015, 6:37 pm
Division: Grad
State: FL
Location: Gainesville, Florida

Re: Electric Vehicle C

Postby windu34 » August 31st, 2015, 4:33 pm

What brand or style of brushless motors would be the best for this event?
Boca Raton Community High School Alumni
Florida State Tournament Director 2020
National Physical Sciences Rules Committee Member
kevin@floridascienceolympiad.org || windu34's Userpage

Circuit Lab Event Supervisor for 2020: UT Austin (B/C), MIT (C), Solon (C), Princeton (C), Golden Gate (C), Nationals (C)

iwonder
Admin Emeritus
Admin Emeritus
Posts: 1112
Joined: May 10th, 2011, 8:25 pm
Division: Grad
State: TX

Re: Electric Vehicle C

Postby iwonder » September 1st, 2015, 5:14 am

What brand or style of brushless motors would be the best for this event?
Really everything here depends on the rules and what they're looking for out of the vehicle. Brushless motors may not be the best option, but we won't know until rules are published.
'If you're the smartest person in the room, you're in the wrong room' - Unknown

retired1
Member
Member
Posts: 673
Joined: July 25th, 2012, 5:04 pm
Division: Grad
State: FL

Re: Electric Vehicle C

Postby retired1 » September 2nd, 2015, 3:22 pm

Considering that there is not a significant weight problem, what advantage would a brushless motor have over a less expensive brushed motor?

User avatar
windu34
Moderator
Moderator
Posts: 1339
Joined: April 19th, 2015, 6:37 pm
Division: Grad
State: FL
Location: Gainesville, Florida

Re: Electric Vehicle C

Postby windu34 » September 2nd, 2015, 7:40 pm

Speed, Torque, integratability to a microcontroller
Boca Raton Community High School Alumni
Florida State Tournament Director 2020
National Physical Sciences Rules Committee Member
kevin@floridascienceolympiad.org || windu34's Userpage

Circuit Lab Event Supervisor for 2020: UT Austin (B/C), MIT (C), Solon (C), Princeton (C), Golden Gate (C), Nationals (C)

Flavorflav
Member
Member
Posts: 1358
Joined: February 5th, 2006, 7:06 am
Division: Grad
State: NY

Re: Electric Vehicle C

Postby Flavorflav » September 4th, 2015, 7:48 am

I strongly suspect speed and torque will not be very important in this event, but as iwonder said we won't really know anything until we see the rules.

JonB
Coach
Coach
Posts: 282
Joined: March 11th, 2014, 12:00 pm
Division: C
State: FL

Re: Electric Vehicle C

Postby JonB » September 4th, 2015, 9:31 am

I strongly suspect speed and torque will not be very important in this event, but as iwonder said we won't really know anything until we see the rules.

Rules are out. Speed is part of the score (time score). Basically, it's how they determined run time for scrambler.

I must say that I am really, really surprised there are not more restrictions in the rules (brushed vs brushless).

iwonder
Admin Emeritus
Admin Emeritus
Posts: 1112
Joined: May 10th, 2011, 8:25 pm
Division: Grad
State: TX

Re: Electric Vehicle C

Postby iwonder » September 4th, 2015, 7:30 pm

Just to throw this out there, I would personally find a nice high torque stepper motor for this event and focus on the motion control to allow it to hit the target.

Done properly, which will require a significant, but reasonable, amount of effort, I believe sub-centimeter positioning is pretty reasonable. With the right setup such a motor could also move fairly quickly.

Brushless motors are nice, but precise speed control isn't really their thing. They can spin fast but the hobby level ESCs aren't designed to maintain speed to within an RPM or two, so you'd need some sort of position feedback, and a closed loop control system.

Both systems are reasonable, the stepper is open loop, so no position feedback is required, which makes the software easier, but you have to worry about accelerating stepper motors (they have these ugly things called resonances, microstepping is a decent work around). The brushless motor is closed loop, which means some sort of feedback and perhaps something like a PID loop, and some trial and error to make it work right. I believe both systems could achieve similar position and speed at the upper end of competition.

The disclaimer is that I haven't gotten my rulebook yet so I don't know all of the details, just the general idea. Oh, and in case you couldn't tell, this is arguably my favorite event in the whole of scioly. Like ever.
'If you're the smartest person in the room, you're in the wrong room' - Unknown

User avatar
windu34
Moderator
Moderator
Posts: 1339
Joined: April 19th, 2015, 6:37 pm
Division: Grad
State: FL
Location: Gainesville, Florida

Re: Electric Vehicle C

Postby windu34 » September 4th, 2015, 8:16 pm

There are brushless motors that will go 60mph in less than a second. Correct me if Im im wrong, but stepper motors will not come even close to that. Granted, steppers are easier to get precise distance wise, but this set of rules does not favor purely perfect distance; high speeds are needed to do well at high levels of competition.
Boca Raton Community High School Alumni
Florida State Tournament Director 2020
National Physical Sciences Rules Committee Member
kevin@floridascienceolympiad.org || windu34's Userpage

Circuit Lab Event Supervisor for 2020: UT Austin (B/C), MIT (C), Solon (C), Princeton (C), Golden Gate (C), Nationals (C)

iwonder
Admin Emeritus
Admin Emeritus
Posts: 1112
Joined: May 10th, 2011, 8:25 pm
Division: Grad
State: TX

Re: Electric Vehicle C

Postby iwonder » September 4th, 2015, 8:40 pm

There are brushless motors that will go 60mph in less than a second. Correct me if Im im wrong, but stepper motors will not come even close to that. Granted, steppers are easier to get precise distance wise, but this set of rules does not favor purely perfect distance; high speeds are needed to do well at high levels of competition.
Uhhh... Motors spin, but mph is a linear speed, so that doesn't even make sense. Certainly, brushless motors can accelerate fast, but both types of motors put out maximum torque from a standstill.

Next, you're not going to get your vehicle to 60mph on the track. Sorry. That's a safety issue even if it were technically possible. There are plenty of other options that will go as fast as your vehicle allows that aren't brushless.

[rant]
Look, brushless motors are great, they work well in airplanes, quadcopters, cars, and lots of R/C hobby things. They did well in MagLev when they were allowed. But they're not the end all be all magic bullet to solve all your problems. There are specific needs for this event, you need to determine what they are and research options for motors, picking the one the data says will do best. Don't go with the most expensive or the one that everyone hypes. This is engineering, go with the data.

I'm not saying steppers are perfect, in fact, I said, "Both systems are reasonable", (certainly there are even more options out there as well) and I'm not sure which way I would go if I were still competing. But I would have to sit down and work out designs with each and see what would get me the better score. It's best to not be locked in to 'Brushless, Brushless, Brushless' simply because that's the most hyped technology.
[/rant]
'If you're the smartest person in the room, you're in the wrong room' - Unknown


Return to “Electric Vehicle C”

Who is online

Users browsing this forum: No registered users and 0 guests