Circuit Lab B/C

User avatar
Things2do
Member
Member
Posts: 125
Joined: February 12th, 2018, 2:30 pm
Division: C
State: TN
Location: Unfortunately, not Utah somewhere near the Colorado border

Re: Circuit Lab B/C

Postby Things2do » October 11th, 2018, 2:51 pm

Sorry to interject, but do you guys think that real tests will be as trivia/fact based as this QM seems to be going in the trend of?
I would have thought it would be much more calculation based.
Well i mean, its always good to know those random facts because they might appear on a test. and sometimes you rlly cant study for these random facts.
They're not really random so far though
What is a magnetic quadrupole?
A configuration of magnets with four poles (which is useful because the magnetic field decreases faster than that of a dipole)
Sounds good.
Sorry to interject, but do you guys think that real tests will be as trivia/fact based as this QM seems to be going in the trend of?
I would have thought it would be much more calculation based.
So far, this has just been going over concepts. I'd expect lots of basic calculations in the beginning of actual tests (mostly because making up numbers is effort).
Not only is it effort, but you've also gotta run 'em yourself; both for the answer, and to make sure they're realistic enough for to be mathematically plausible.
John 5:46-47
When your signature exceeds the allotted 300 characters, you put it here...
Is this where I put the Builder Cult?
"I think that we're all mentally ill. Those of us outside the asylums only hide it a little better - and maybe not all that much better after all." - Stephen King

UTF-8 U+6211 U+662F
Exalted Member
Exalted Member
Posts: 1518
Joined: January 18th, 2015, 7:42 am
Division: C
State: PA

Re: Circuit Lab B/C

Postby UTF-8 U+6211 U+662F » October 11th, 2018, 3:12 pm

Explain the purpose of fuses and how they are used.

MattChina
Member
Member
Posts: 224
Joined: February 12th, 2017, 8:06 am
Division: B
State: NY
Location: somewhere over the rainbow

Re: Circuit Lab B/C

Postby MattChina » October 11th, 2018, 3:19 pm

Explain the purpose of fuses and how they are used.
Fuses are basically an electrical component used to prevent overcurrent in a circuit. It is usually a metal strip that melts when the current becomes too large therefore breaking the circuit. They are used in electrical appliances, and on the power grid and in our houses.
2019 events: Water Quality, Battery Buggy, Elastic Launch Glider, Density Lab, Circuit Lab, Thermodynamics
R.C Murphy Co-Captain
Dank Memes Area Homeschool Team member

UTF-8 U+6211 U+662F
Exalted Member
Exalted Member
Posts: 1518
Joined: January 18th, 2015, 7:42 am
Division: C
State: PA

Re: Circuit Lab B/C

Postby UTF-8 U+6211 U+662F » October 11th, 2018, 4:23 pm

Explain the purpose of fuses and how they are used.
Fuses are basically an electrical component used to prevent overcurrent in a circuit. It is usually a metal strip that melts when the current becomes too large therefore breaking the circuit. They are used in electrical appliances, and on the power grid and in our houses.
Last edited by UTF-8 U+6211 U+662F on October 11th, 2018, 4:39 pm, edited 1 time in total.

MattChina
Member
Member
Posts: 224
Joined: February 12th, 2017, 8:06 am
Division: B
State: NY
Location: somewhere over the rainbow

Re: Circuit Lab B/C

Postby MattChina » October 11th, 2018, 4:39 pm

What is the difference of total resistance of a circuit with 3 resistors of 6 ohms each arranged in a series vs parallel?
2019 events: Water Quality, Battery Buggy, Elastic Launch Glider, Density Lab, Circuit Lab, Thermodynamics
R.C Murphy Co-Captain
Dank Memes Area Homeschool Team member

UTF-8 U+6211 U+662F
Exalted Member
Exalted Member
Posts: 1518
Joined: January 18th, 2015, 7:42 am
Division: C
State: PA

Re: Circuit Lab B/C

Postby UTF-8 U+6211 U+662F » October 11th, 2018, 4:40 pm

What is the difference of total resistance of a circuit with 3 resistors of 6 ohms each arranged in a series vs parallel?
Series: 18 ohms, Parallel: 2 ohms

MattChina
Member
Member
Posts: 224
Joined: February 12th, 2017, 8:06 am
Division: B
State: NY
Location: somewhere over the rainbow

Re: Circuit Lab B/C

Postby MattChina » October 11th, 2018, 4:44 pm

What is the difference of total resistance of a circuit with 3 resistors of 6 ohms each arranged in a series vs parallel?
Series: 18 ohms, Parallel: 2 ohms
yep
2019 events: Water Quality, Battery Buggy, Elastic Launch Glider, Density Lab, Circuit Lab, Thermodynamics
R.C Murphy Co-Captain
Dank Memes Area Homeschool Team member

Jacobi
Exalted Member
Exalted Member
Posts: 137
Joined: September 4th, 2018, 7:47 am

Re: Circuit Lab B/C

Postby Jacobi » October 11th, 2018, 5:02 pm

What is the difference of total resistance of a circuit with 3 resistors of 6 ohms each arranged in a series vs parallel?
Well, it depends.
The resistance in series is 18 ohms (sum).  The resistance in parallel is 2 ohms ([math]\frac{1}{\Sigma\frac{1}{R}}[/math]). The difference is 16 ohms.
When resistors are placed in series, the electrons have to go through multiple blockages to complete the circuit.  Thus, the total resistance is greater.  When resistors are placed in parallel, the electrons have multiple pathways, and thus they encounter less overall resistance.
Take your pick.

MattChina
Member
Member
Posts: 224
Joined: February 12th, 2017, 8:06 am
Division: B
State: NY
Location: somewhere over the rainbow

Re: Circuit Lab B/C

Postby MattChina » October 11th, 2018, 5:03 pm

What is the difference of total resistance of a circuit with 3 resistors of 6 ohms each arranged in a series vs parallel?
Well, it depends.
The resistance in series is 18 ohms (sum).  The resistance in parallel is 2 ohms ([math]\frac{1}{\Sigma\frac{1}{R}}[/math]). The difference is 16 ohms.
When resistors are placed in series, the electrons have to go through multiple blockages to complete the circuit.  Thus, the total resistance is greater.  When resistors are placed in parallel, the electrons have multiple pathways, and thus they encounter less overall resistance.
Take your pick.
Questions was already answered
2019 events: Water Quality, Battery Buggy, Elastic Launch Glider, Density Lab, Circuit Lab, Thermodynamics
R.C Murphy Co-Captain
Dank Memes Area Homeschool Team member

Jacobi
Exalted Member
Exalted Member
Posts: 137
Joined: September 4th, 2018, 7:47 am

Re: Circuit Lab B/C

Postby Jacobi » October 11th, 2018, 5:05 pm

What is the difference of total resistance of a circuit with 3 resistors of 6 ohms each arranged in a series vs parallel?
Well, it depends.
The resistance in series is 18 ohms (sum).  The resistance in parallel is 2 ohms ([math]\frac{1}{\Sigma\frac{1}{R}}[/math]). The difference is 16 ohms.
When resistors are placed in series, the electrons have to go through multiple blockages to complete the circuit.  Thus, the total resistance is greater.  When resistors are placed in parallel, the electrons have multiple pathways, and thus they encounter less overall resistance.
Take your pick.
Questions was already answered
Sorry.


Return to “2019 Question Marathons”

Who is online

Users browsing this forum: No registered users and 0 guests