Okay, but how would you use a caliper, if the vehicle is so thin. The wider it is, the easier you can tell the numbers apart on a caliper and the more accurate. Would you just have to get a better caliper? I am using 1/1000 inch and it is not accurate enough. If I made it less than 20cm, it would not be close. How did you solve this problem?jgrischow1 wrote:Use a rod with more threads per inch. They make coarse threaded rod, which is often around 20 tpi, which you might be using, as well as fine threaded rod, which gets up to 28+ tpi.AugustW wrote:How do you get it less than 20cm. Do you use wingnut to stop, because I do, and that is the narrowest I can get it with having enough room for the wing nut to reach 12 meters distance. I used wingnut and counting revolutions. Do you have any other ideas of how to brake. Also, is there electric vehicle in high school? Still active?
Vehicle Thickness
Re: Vehicle Thickness
-
- Member
- Posts: 255
- Joined: March 20th, 2011, 3:21 pm
- Division: B
- State: OH
- Has thanked: 0
- Been thanked: 17 times
Re: Vehicle Thickness
Sorry, my kids don't use a caliper. My post was specifically in reference to your braking question.AugustW wrote:Okay, but how would you use a caliper, if the vehicle is so thin. The wider it is, the easier you can tell the numbers apart on a caliper and the more accurate. Would you just have to get a better caliper? I am using 1/1000 inch and it is not accurate enough. If I made it less than 20cm, it would not be close. How did you solve this problem?jgrischow1 wrote:Use a rod with more threads per inch. They make coarse threaded rod, which is often around 20 tpi, which you might be using, as well as fine threaded rod, which gets up to 28+ tpi.AugustW wrote:How do you get it less than 20cm. Do you use wingnut to stop, because I do, and that is the narrowest I can get it with having enough room for the wing nut to reach 12 meters distance. I used wingnut and counting revolutions. Do you have any other ideas of how to brake. Also, is there electric vehicle in high school? Still active?
- MadCow2357
- Exalted Member
- Posts: 774
- Joined: November 19th, 2017, 9:09 am
- Division: C
- State: RI
- Has thanked: 211 times
- Been thanked: 56 times
- Contact:
Re: Vehicle Thickness
Lol dude this isn't really the thread for this question. Try General Chat.AugustW wrote:Are there any competitions in high school that are not sci oly , but like it?
Maximize the length the buggy to increase the wheelbase. A larger wheelbase results in better 'precision'.AugustW wrote:Okay, but how would you use a caliper, if the vehicle is so thin. The wider it is, the easier you can tell the numbers apart on a caliper and the more accurate. Would you just have to get a better caliper? I am using 1/1000 inch and it is not accurate enough. If I made it less than 20cm, it would not be close. How did you solve this problem?jgrischow1 wrote:Use a rod with more threads per inch. They make coarse threaded rod, which is often around 20 tpi, which you might be using, as well as fine threaded rod, which gets up to 28+ tpi.AugustW wrote:How do you get it less than 20cm. Do you use wingnut to stop, because I do, and that is the narrowest I can get it with having enough room for the wing nut to reach 12 meters distance. I used wingnut and counting revolutions. Do you have any other ideas of how to brake. Also, is there electric vehicle in high school? Still active?
Re: Vehicle Thickness
I swear man you guys are literally using the same terminology and design as us.MadCow2357 wrote:Lol dude this isn't really the thread for this question. Try General Chat.AugustW wrote:Are there any competitions in high school that are not sci oly , but like it?
Maximize the length the buggy to increase the wheelbase. A larger wheelbase results in better 'precision'.AugustW wrote:Okay, but how would you use a caliper, if the vehicle is so thin. The wider it is, the easier you can tell the numbers apart on a caliper and the more accurate. Would you just have to get a better caliper? I am using 1/1000 inch and it is not accurate enough. If I made it less than 20cm, it would not be close. How did you solve this problem?jgrischow1 wrote:
Use a rod with more threads per inch. They make coarse threaded rod, which is often around 20 tpi, which you might be using, as well as fine threaded rod, which gets up to 28+ tpi.
- MadCow2357
- Exalted Member
- Posts: 774
- Joined: November 19th, 2017, 9:09 am
- Division: C
- State: RI
- Has thanked: 211 times
- Been thanked: 56 times
- Contact:
Re: Vehicle Thickness
Wdym?athanzxyt wrote:I swear man you guys are literally using the same terminology and design as us.
I don't think I have the same design, at least... but again I haven't seen your buggy so ¯\_(ツ)_/¯
Who is online
Users browsing this forum: No registered users and 0 guests