PICTURES, SCORES, VIDEOS!!

scottK2019
Member
Member
Posts: 7
Joined: April 7th, 2019, 6:58 am
Division: B
State: NJ

Re: PICTURES, SCORES, VIDEOS!!

Postby scottK2019 » April 11th, 2019, 10:05 am

Ao far, highest 2870, box design boomilever with Div B spec, 2340 can be obtained; tube boomilever, with div B spec 2260.

Epoxy glue for key joint and foam polyurethane glue (Lowe's gorilla expansion glue, you have to remove the extra glue) for secondary joint. It would take 24 hour to develop full strength. You may need to plan 3-4 days to make one boomilever.

scottK2019
Member
Member
Posts: 7
Joined: April 7th, 2019, 6:58 am
Division: B
State: NJ

Re: PICTURES, SCORES, VIDEOS!!

Postby scottK2019 » April 11th, 2019, 10:08 am

scioly2345 wrote:New York- Division B
1st- 9.54g holding 15kg
Any other Div B NY scores?


With Tube Boomilever, you may get 2200 above

scioly2345
Member
Member
Posts: 41
Joined: April 23rd, 2017, 7:20 pm
Division: C
State: NY

Re: PICTURES, SCORES, VIDEOS!!

Postby scioly2345 » April 11th, 2019, 12:06 pm

scottK2019 wrote:
scioly2345 wrote:New York- Division B
1st- 9.54g holding 15kg
Any other Div B NY scores?


With Tube Boomilever, you may get 2200 above


By tube, do you mean a tower chimney type design?
2016-2019 Brother Joseph Fox
2020-2022 Kellenberg
2019 - Boomilever, Disease Detectives, Herpetology, Potions and Poisons, Write It Do It
God Bless and Rest In Peace Len Joeris (Balsa Man)
“for the betterment of science”

AlexDeKuang
Member
Member
Posts: 10
Joined: January 25th, 2019, 11:00 am

Re: PICTURES, SCORES, VIDEOS!!

Postby AlexDeKuang » April 11th, 2019, 12:44 pm

scioly2345 wrote:
scottK2019 wrote:
scioly2345 wrote:New York- Division B
1st- 9.54g holding 15kg
Any other Div B NY scores?


With Tube Boomilever, you may get 2200 above


By tube, do you mean a tower chimney type design?

Nope its a literal tube. :)

AlexDeKuang
Member
Member
Posts: 10
Joined: January 25th, 2019, 11:00 am

Re: PICTURES, SCORES, VIDEOS!!

Postby AlexDeKuang » April 11th, 2019, 12:47 pm

scottK2019 wrote:Ao far, highest 2870, box design boomilever with Div B spec, 2340 can be obtained; tube boomilever, with div B spec 2260.

Epoxy glue for key joint and foam polyurethane glue (Lowe's gorilla expansion glue, you have to remove the extra glue) for secondary joint. It would take 24 hour to develop full strength. You may need to plan 3-4 days to make one boomilever.

Is the box design the compression box or a box made from sheets?

scioly2345
Member
Member
Posts: 41
Joined: April 23rd, 2017, 7:20 pm
Division: C
State: NY

Re: PICTURES, SCORES, VIDEOS!!

Postby scioly2345 » April 11th, 2019, 3:15 pm

AlexDeKuang wrote:
scioly2345 wrote:
scottK2019 wrote:
With Tube Boomilever, you may get 2200 above


By tube, do you mean a tower chimney type design?

Nope its a literal tube. :)


How does that work? Rolling balsa sheet? Just getting an extra light balsa dowel and screwing a hole in the end?
2016-2019 Brother Joseph Fox
2020-2022 Kellenberg
2019 - Boomilever, Disease Detectives, Herpetology, Potions and Poisons, Write It Do It
God Bless and Rest In Peace Len Joeris (Balsa Man)
“for the betterment of science”

Dreamz
Member
Member
Posts: 30
Joined: February 5th, 2019, 3:55 pm
Division: C
State: OH

Re: PICTURES, SCORES, VIDEOS!!

Postby Dreamz » April 11th, 2019, 4:10 pm

scioly2345 wrote:
AlexDeKuang wrote:
scioly2345 wrote:
By tube, do you mean a tower chimney type design?

Nope its a literal tube. :)


How does that work? Rolling balsa sheet? Just getting an extra light balsa dowel and screwing a hole in the end?


Yeah, how do you connect tube with tensions?

scioly2345
Member
Member
Posts: 41
Joined: April 23rd, 2017, 7:20 pm
Division: C
State: NY

Re: PICTURES, SCORES, VIDEOS!!

Postby scioly2345 » April 11th, 2019, 4:33 pm

Dreamz wrote:
scioly2345 wrote:
AlexDeKuang wrote:Nope its a literal tube. :)


How does that work? Rolling balsa sheet? Just getting an extra light balsa dowel and screwing a hole in the end?


Yeah, how do you connect tube with tensions?


I agree, don’t you need a flat surface to connect tension to compression?
Personally, I wouldn’t try to overdo the design. Trying to put tension sticks on a curved surface seems too complicated. I tend to stick with a simple design and just trying to get that to get maximum efficiency with that boomi mass, then trying to dial down the boomi mass.
2016-2019 Brother Joseph Fox
2020-2022 Kellenberg
2019 - Boomilever, Disease Detectives, Herpetology, Potions and Poisons, Write It Do It
God Bless and Rest In Peace Len Joeris (Balsa Man)
“for the betterment of science”

falcon1236912
Member
Member
Posts: 23
Joined: February 21st, 2018, 7:59 am
State: MO

Re: PICTURES, SCORES, VIDEOS!!

Postby falcon1236912 » April 11th, 2019, 4:51 pm

scioly2345 wrote:
Dreamz wrote:
scioly2345 wrote:
How does that work? Rolling balsa sheet? Just getting an extra light balsa dowel and screwing a hole in the end?


Yeah, how do you connect tube with tensions?


I agree, don’t you need a flat surface to connect tension to compression?
Personally, I wouldn’t try to overdo the design. Trying to put tension sticks on a curved surface seems too complicated. I tend to stick with a simple design and just trying to get that to get maximum efficiency with that boomi mass, then trying to dial down the boomi mass.


check the tube boomilever forum page.

Rossyspsce
Member
Member
Posts: 180
Joined: June 3rd, 2018, 5:32 pm
State: -

Re: PICTURES, SCORES, VIDEOS!!

Postby Rossyspsce » April 15th, 2019, 10:46 am

Washington state scores

1. Bothell hs~1200
20. Camas hs black~1740 full load
21. Camas hs red~1720 14008g load

Note: the scale for measuring boom weight was slightly off, rounded to .1 of grams but was not accurate

User avatar
MadCow2357
Member
Member
Posts: 583
Joined: November 19th, 2017, 9:09 am
Division: C
State: RI
Location: Stark Industries Internship
Contact:

Re: PICTURES, SCORES, VIDEOS!!

Postby MadCow2357 » April 15th, 2019, 3:46 pm

Rossyspsce wrote:Washington state scores

1. Bothell hs~1200
20. Camas hs black~1740 full load
21. Camas hs red~1720 14008g load

Note: the scale for measuring boom weight was slightly off, rounded to .1 of grams but was not accurate

Wait how was first place 1200, and 20th and 21st both higher at around 1700.
MadCow2357's Userpage
Projected 2020 Events: Boomilever, Gravity Vehicle
Considering: Fossils, Machines, Sounds of Music, Wright Stuff
Builder Cult - builders rise up! :)
Dank Memes Area Homeschool
234.36
#BalsaManForever

Rossyspsce
Member
Member
Posts: 180
Joined: June 3rd, 2018, 5:32 pm
State: -

Re: PICTURES, SCORES, VIDEOS!!

Postby Rossyspsce » April 15th, 2019, 6:38 pm

MadCow2357 wrote:
Rossyspsce wrote:Washington state scores

1. Bothell hs~1200
20. Camas hs black~1740 full load
21. Camas hs red~1720 14008g load

Note: the scale for measuring boom weight was slightly off, rounded to .1 of grams but was not accurate

Wait how was first place 1200, and 20th and 21st both higher at around 1700.


Bolt for the block was too short so they were tiered for it, even after they were told it was ok

User avatar
MadCow2357
Member
Member
Posts: 583
Joined: November 19th, 2017, 9:09 am
Division: C
State: RI
Location: Stark Industries Internship
Contact:

Re: PICTURES, SCORES, VIDEOS!!

Postby MadCow2357 » April 15th, 2019, 7:03 pm

Rossyspsce wrote:
MadCow2357 wrote:
Rossyspsce wrote:Washington state scores

1. Bothell hs~1200
20. Camas hs black~1740 full load
21. Camas hs red~1720 14008g load

Note: the scale for measuring boom weight was slightly off, rounded to .1 of grams but was not accurate

Wait how was first place 1200, and 20th and 21st both higher at around 1700.


Bolt for the block was too short so they were tiered for it, even after they were told it was ok

Did they use tube designs?
MadCow2357's Userpage
Projected 2020 Events: Boomilever, Gravity Vehicle
Considering: Fossils, Machines, Sounds of Music, Wright Stuff
Builder Cult - builders rise up! :)
Dank Memes Area Homeschool
234.36
#BalsaManForever

Rossyspsce
Member
Member
Posts: 180
Joined: June 3rd, 2018, 5:32 pm
State: -

Re: PICTURES, SCORES, VIDEOS!!

Postby Rossyspsce » April 15th, 2019, 7:18 pm

MadCow2357 wrote:
Rossyspsce wrote:
MadCow2357 wrote:Wait how was first place 1200, and 20th and 21st both higher at around 1700.


Bolt for the block was too short so they were tiered for it, even after they were told it was ok

Did they use tube designs?


Both camas did

AlexDeKuang
Member
Member
Posts: 10
Joined: January 25th, 2019, 11:00 am

Re: PICTURES, SCORES, VIDEOS!!

Postby AlexDeKuang » April 15th, 2019, 7:18 pm

Rossyspsce wrote:
MadCow2357 wrote:
Rossyspsce wrote:Washington state scores

1. Bothell hs~1200
20. Camas hs black~1740 full load
21. Camas hs red~1720 14008g load

Note: the scale for measuring boom weight was slightly off, rounded to .1 of grams but was not accurate

Wait how was first place 1200, and 20th and 21st both higher at around 1700.


Bolt for the block was too short so they were tiered for it, even after they were told it was ok


So if 1200 was the score after the tier, how did they still get first?


Return to “Boomilever B/C”

Who is online

Users browsing this forum: No registered users and 0 guests