Density Lab B

 Member
 Posts: 15
 Joined: January 12th, 2020, 12:25 pm
 Division: B
 Has thanked: 0
 Been thanked: 0

 Member
 Posts: 26
 Joined: November 3rd, 2018, 2:19 pm
 Division: B
 State: NC
 Has thanked: 2 times
 Been thanked: 0
Re: Density Lab B
[1) Gases are composed of many tiny particles traveling in random straightline motion. 2) The volume of the gas particles is negligible compared to the total volume of the container. 3) The attractive and repulsive forces between particles are negligible. 4) Collisions are completely elastic. 5) The average K.E. is proportional to the absolute temperature of the gas.
Jay M. Robinson Junior Varsity 20192020
2019 Events: Circuit Lab, Crime Busters, Density Lab
2020 Events: Circuit Lab, Codebusters (Trial), Crime Busters, Density Lab
2019 Events: Circuit Lab, Crime Busters, Density Lab
2020 Events: Circuit Lab, Codebusters (Trial), Crime Busters, Density Lab

 Member
 Posts: 15
 Joined: January 12th, 2020, 12:25 pm
 Division: B
 Has thanked: 0
 Been thanked: 0

 Member
 Posts: 26
 Joined: November 3rd, 2018, 2:19 pm
 Division: B
 State: NC
 Has thanked: 2 times
 Been thanked: 0
Re: Density Lab B
Ok,
1) What is the concentration in ppm of 5.5 milligrams of salt dissolved in 300 mL of water?
2) An object is placed in a graduated cylinder filled with 500 mL of water. The water level rises to 550 mL. Assuming the object is completely submerged, what is the density of this object in kg/m^3 if the object weighs 1.916 N?
3) There are 2.9 moles of oxygen gas held in container that has a volume of 100 mL. What is the number density of the oxygen gas in molecules/m^3?
1) What is the concentration in ppm of 5.5 milligrams of salt dissolved in 300 mL of water?
2) An object is placed in a graduated cylinder filled with 500 mL of water. The water level rises to 550 mL. Assuming the object is completely submerged, what is the density of this object in kg/m^3 if the object weighs 1.916 N?
3) There are 2.9 moles of oxygen gas held in container that has a volume of 100 mL. What is the number density of the oxygen gas in molecules/m^3?
Jay M. Robinson Junior Varsity 20192020
2019 Events: Circuit Lab, Crime Busters, Density Lab
2020 Events: Circuit Lab, Codebusters (Trial), Crime Busters, Density Lab
2019 Events: Circuit Lab, Crime Busters, Density Lab
2020 Events: Circuit Lab, Codebusters (Trial), Crime Busters, Density Lab
 Sapphire
 Member
 Posts: 27
 Joined: April 15th, 2019, 4:52 pm
 Division: B
 State: MI
 Location: Somewhere in NGC5128
 Has thanked: 0
 Been thanked: 0
Re: Density Lab B
1) 8.5 ppm using a density of 2.16 g/cm^3 for salt.
2) 3,910 kg/m^3
3) 1.7*10^27 molecules/m^3
2) 3,910 kg/m^3
3) 1.7*10^27 molecules/m^3
Last edited by Sapphire on February 24th, 2020, 12:45 pm, edited 1 time in total.
Hello to my coaches, Pioneers, and fellow Slauson peeps!
2020  Crime Busters, Circuit Lab, Density Lab, RFTS, Mission Possible
2020  Crime Busters, Circuit Lab, Density Lab, RFTS, Mission Possible

 Member
 Posts: 26
 Joined: November 3rd, 2018, 2:19 pm
 Division: B
 State: NC
 Has thanked: 2 times
 Been thanked: 0
Re: Density Lab B
1) I believe the answer is 18.33 ppm.
Explanation: First, we have to convert both of the masses to the same unit (e.g. both have grams for units). 5.5 milligrams is equivalent to 0.0055 grams. 300 mL of water has a mass of 300 grams.
Now, to find ppm: 0.0055 grams / 300 grams x 1,000,000, bringing our final answer to about 18.33 ppm.
**I didn’t use significant figures here because the answer would be a bit inaccurate, as the answer would have 20 ppm (1 sig fig in 300)
2) Correct.
3) I believe the answer is 3.49 x 10^28 molecules/m^3.
Explanation: Since there are two molecules in oxygen gas, we multiply 2.9 moles by two. This brings the number of moles to 5.8, which we can then multiply by Avagadro’s Number (6.022 x 10^23) to get the number of molecules, which is 3.493 x 10^24. To convert mL to m^3, we have to divide by 10^6, so 100 mL / 10^6 = 0.000100 m^3. To find molecules/m^3, we simply divide: 3.493 x 10^24 / 0.000100, bringing our final answer to 3.49 x 10^28 molecules/m^3. (3 significant figures here)
Jay M. Robinson Junior Varsity 20192020
2019 Events: Circuit Lab, Crime Busters, Density Lab
2020 Events: Circuit Lab, Codebusters (Trial), Crime Busters, Density Lab
2019 Events: Circuit Lab, Crime Busters, Density Lab
2020 Events: Circuit Lab, Codebusters (Trial), Crime Busters, Density Lab
 Sapphire
 Member
 Posts: 27
 Joined: April 15th, 2019, 4:52 pm
 Division: B
 State: MI
 Location: Somewhere in NGC5128
 Has thanked: 0
 Been thanked: 0
Re: Density Lab B
1) Oh, I see. I did volume/volume instead of mass/mass. How should I know when to divide what by what? Are there different types of concentration or is it always the same?azboy1910 wrote: ↑February 23rd, 2020, 10:46 am1) I believe the answer is 18.33 ppm.
Explanation: First, we have to convert both of the masses to the same unit (e.g. both have grams for units). 5.5 milligrams is equivalent to 0.0055 grams. 300 mL of water has a mass of 300 grams.
Now, to find ppm: 0.0055 grams / 300 grams x 1,000,000, bringing our final answer to about 18.33 ppm.
**I didn’t use significant figures here because the answer would be a bit inaccurate, as the answer would have 20 ppm (1 sig fig in 300)
2) Correct.
3) I believe the answer is 3.49 x 10^28 molecules/m^3.
Explanation: Since there are two molecules in oxygen gas, we multiply 2.9 moles by two. This brings the number of moles to 5.8, which we can then multiply by Avagadro’s Number (6.022 x 10^23) to get the number of molecules, which is 3.493 x 10^24. To convert mL to m^3, we have to divide by 10^6, so 100 mL / 10^6 = 0.000100 m^3. To find molecules/m^3, we simply divide: 3.493 x 10^24 / 0.000100, bringing our final answer to 3.49 x 10^28 molecules/m^3. (3 significant figures here)
3) I forgot that oxygen gas and oxygen aren't the same thing, and also made a mistake converting the container to m^3. Oops!
Hello to my coaches, Pioneers, and fellow Slauson peeps!
2020  Crime Busters, Circuit Lab, Density Lab, RFTS, Mission Possible
2020  Crime Busters, Circuit Lab, Density Lab, RFTS, Mission Possible

 Member
 Posts: 26
 Joined: November 3rd, 2018, 2:19 pm
 Division: B
 State: NC
 Has thanked: 2 times
 Been thanked: 0
Re: Density Lab B
1) When you are finding ppm, it doesn’t have to necessarily be mass/mass. It could also be volume/volume, or even moles/moles, but they have to be the same unit (e.g. grams/grams and not grams/kilograms). There are also some cases where you can mass/volume, but I would suggest doing mass/mass, moles/moles, or whatever you prefer. For the dividing part, I simply divide mass of solute/mass of solvent, especially if there’s a small amount of solute, but don’t be misled by this because there could be a large amount of solute. In this case, I would instead do mass of solute/mass of solution.Sapphire wrote: ↑February 23rd, 2020, 11:29 am1) Oh, I see. I did volume/volume instead of mass/mass. How should I know when to divide what by what? Are there different types of concentration or is it always the same?azboy1910 wrote: ↑February 23rd, 2020, 10:46 am1) I believe the answer is 18.33 ppm.
Explanation: First, we have to convert both of the masses to the same unit (e.g. both have grams for units). 5.5 milligrams is equivalent to 0.0055 grams. 300 mL of water has a mass of 300 grams.
Now, to find ppm: 0.0055 grams / 300 grams x 1,000,000, bringing our final answer to about 18.33 ppm.
**I didn’t use significant figures here because the answer would be a bit inaccurate, as the answer would have 20 ppm (1 sig fig in 300)
2) Correct.
3) I believe the answer is 3.49 x 10^28 molecules/m^3.
Explanation: Since there are two molecules in oxygen gas, we multiply 2.9 moles by two. This brings the number of moles to 5.8, which we can then multiply by Avagadro’s Number (6.022 x 10^23) to get the number of molecules, which is 3.493 x 10^24. To convert mL to m^3, we have to divide by 10^6, so 100 mL / 10^6 = 0.000100 m^3. To find molecules/m^3, we simply divide: 3.493 x 10^24 / 0.000100, bringing our final answer to 3.49 x 10^28 molecules/m^3. (3 significant figures here)
3) I forgot that oxygen gas and oxygen aren't the same thing, and also made a mistake converting the container to m^3. Oops!
Jay M. Robinson Junior Varsity 20192020
2019 Events: Circuit Lab, Crime Busters, Density Lab
2020 Events: Circuit Lab, Codebusters (Trial), Crime Busters, Density Lab
2019 Events: Circuit Lab, Crime Busters, Density Lab
2020 Events: Circuit Lab, Codebusters (Trial), Crime Busters, Density Lab
 NewSciolyer
 Member
 Posts: 55
 Joined: March 19th, 2019, 4:28 pm
 Division: B
 State: MD
 Has thanked: 0
 Been thanked: 0
Re: Density Lab B
Okay I'll post a few:
1) How is molality affected by temperature?
2) A sample of gas occupies a volume of 11.1 L at 1.23 atm and 0.0 degrees Celsius. What volume does the sample of gas occupy at 3.15 atm and 100.0 degrees Celsius?
3)All of the below are types of densities except:
a) Mass density
b) Number density
c) Area density
d Volume density
1) How is molality affected by temperature?
2) A sample of gas occupies a volume of 11.1 L at 1.23 atm and 0.0 degrees Celsius. What volume does the sample of gas occupy at 3.15 atm and 100.0 degrees Celsius?
3)All of the below are types of densities except:
a) Mass density
b) Number density
c) Area density
d Volume density
 waterboy
 Member
 Posts: 50
 Joined: March 8th, 2019, 12:47 pm
 Division: B
 State: IN
 Location: TJMS
 Has thanked: 2 times
 Been thanked: 2 times
Re: Density Lab B
1) Molality is not affected by temperatureNewSciolyer wrote: ↑February 24th, 2020, 3:12 pmOkay I'll post a few:
1) How is molality affected by temperature?
2) A sample of gas occupies a volume of 11.1 L at 1.23 atm and 0.0 degrees Celsius. What volume does the sample of gas occupy at 3.15 atm and 100.0 degrees Celsius?
3)All of the below are types of densities except:
a) Mass density
b) Number density
c) Area density
d Volume density
2) 5.92 L
3) dVolume density
Circuit Lab, Density Lab, Machines, Mission Possible
Remembering Gerard Putz
Remembering Gerard Putz
Who is online
Users browsing this forum: No registered users and 0 guests